Features:
- Safety control role: Executes the validated safety application within the AC500-S architecture.
- Structured diagnostics: Controller and project evidence support controlled fault isolation.
- Lifecycle discipline: Replacement and change work remain tied to the approved safety file.
SM560-S 1SAP280000R0001 provides the controller layer for AC500-S machine-safety functions without the additional PROFIsafe F-Device role of the FD variants.
Engineering should maintain clear boundaries between standard control, safety logic, approved communications and the documented shutdown response.
Any replacement requires the verified project, firmware record, wiring and I/O map, validation plan and proof-test results.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
ABB SM560-S 1SAP280000R0001 AC500-S Safety CPU Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB SM560-S 1SAP280000R0001 AC500-S Safety CPU Specs
General
- ManufacturerABB
- ModelSM560-S 1SAP280000R0001
- ConditionNew Original ready stock
- Product FamilyABB AC500-S
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Risk reduction: Trace every safety function to the approved risk assessment.
- I/O path: Verify each configured safety input and output channel.
- Response: Test the designed safe state and restart conditions.
- Change record: Control every hardware or logic modification.
- Controller state: Record diagnostic codes before replacing hardware.
- Project match: Compare the running application with the controlled archive.
- I/O evidence: Check channel and communication status at the failure time.
- Root cause: Retain findings and corrective-action evidence.
- Mounting: Follow ABB spacing, orientation and enclosure requirements.
- Power and earth: Verify supply quality, grounding and shielding.
- Connectors: Check seating, strain relief and approved accessories.
- Release: Complete the documented safety validation before operation.