Features:
- 90 kW normal-use rating with 169 A output
- R7 IP21 wall-mounted drive construction
- 161 A light-duty and 145 A heavy-duty operating points
ACS580-01-169A-4 3AUA0000080505 is the R7 configuration for 90 kW motor applications on 380–480 V supplies.
The drive’s control and communication resources can integrate a high-current motor feeder with plant references, permissives, feedback, safety functions, and fault reporting.
Successful deployment depends on early agreement about logistics, lifting and support, cable and protection engineering, ventilation, load and braking duty, network ownership, safe commissioning, spares, and maintenance access.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
ABB ACS580-01-169A-4 3AUA0000080505 ACS580 General Purpose Wall-Mounted Drive Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB ACS580-01-169A-4 3AUA0000080505 ACS580 General Purpose Wall-Mounted Drive Specs
General
- ManufacturerABB
- ModelACS580-01-169A-4 3AUA0000080505
- ConditionNew Original ready stock
- Product FamilyABB ACS580-01 Drives
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
R7 engineering deliverables
- Logistics: Define transport dimensions, route, unloading, lifting equipment, and protected storage.
- Mechanical: Approve mounting support, clearances, cable spaces, and service access.
- Electrical: Complete protection, isolation, conductor, earthing, and motor studies.
- Controls: Freeze the signal list, network ownership, safety logic, and commissioning plan.
High-current R7 preparation
- Lifting: Follow the R7 hardware instructions and approved site lifting plan.
- Power cables: Control lug selection, crimping, bend radius, support, torque, and phase spacing.
- Airflow: Provide the required cool-air path without recirculation or obstruction.
- Inspection: Use witnessed checks for mounting, terminals, PE, shields, control wiring, and options.
Operational readiness
- Baseline: Archive parameters, motor identification, firmware, option codes, and acceptance readings.
- Inspection access: Keep fans, filters, terminals, panel, and communication modules serviceable.
- Fault capture: Preserve operating values and process context before resetting recurrent trips.
- Contingency: Document isolation, recovery, spare scope, parameter restoration, and post-repair testing.