Features:
- Two-port EtherNet/IP fieldbus adapter for compatible ABB drives
- 10/100 Mbps communication with automatic data-rate detection
- Supports bus, star and Device Level Ring network topologies
The module connects a compatible ABB drive to an EtherNet/IP network and supports drive control, references, status values and parameter access.
ABB documents integration with common-architecture drives including ACS380, ACS480, ACS580, ACH580, ACQ580, ACS880, DCS880 and DCT880.
Before ordering ABB FEIP-21 3AXD50000192793, confirm the complete catalog reference and documented system requirements.
ABB FEIP-21 3AXD50000192793 Datasheet Manuals, Datasheets, Drivers, Link
Documentation Note: This document is provided for technical reference. Please confirm the applicable product configuration and document revision before ordering.
ABB FEIP-21 3AXD50000192793 EtherNet/IP Adapter Module Specs
General
- Manufacturer ABB
- Model FEIP-21 3AXD50000192793
- Condition New
- Product Family ABB Drives FEIP-21
Documentation Note: Technical information is based on the referenced manufacturer documentation. Verify the complete catalog number and system requirements before ordering.
- Two RJ-45 ports support Ethernet connection and chaining.
- Supported transfer rates are 10 Mbps and 100 Mbps.
- The maximum documented twisted-pair Ethernet segment is 100 m.
- The adapter can transfer drive control commands and references.
- Drive status, actual values and parameters can be accessed through the network.
- Drive Composer Pro can connect through the adapter on supported drives.
- Confirm the host drive explicitly supports FEIP-21.
- Install the module in the documented drive control-unit option slot.
- Verify the complete module identifier and network configuration before commissioning.