Features:
- High-Power IGBT Module Provides Efficient Switching For Industrial Drives And Converters.
- Robust Thermal Design Ensures Reliable Operation Under High Current And Temperature Conditions.
- Compatible With ABB Power Electronics Systems For Seamless Integration And Long-Term Performance.
The ABB FS450R12KE3/AGDR-71CS is a 1200V/450A high-power IGBT module that seamlessly integrates high-performance Infineon power chips with the proprietary AGDR-71CS drive circuitry. It utilizes optimized trench gate field cutoff technology to reduce losses and features built-in undervoltage and short-circuit protection, significantly improving the reliability of heavy-duty industrial drive systems. This module is a core component of the ABB ACS800 frequency converter, ensuring high dynamic current control while significantly reducing the complexity and failure rate of external wiring through optimized electrical layout.
This IGBT kit, with its high voltage withstand and high current carrying capacity, is widely used in mining machinery, large fan and pump control systems, ensuring environmental adaptability and load resilience under continuous operation. Its advanced heat dissipation and drive technology significantly improves system energy efficiency, effectively extends the service life of power semiconductors, and optimizes equipment maintenance efficiency. This component not only simplifies equipment design but also delivers industrial value in heavy-duty production by improving motor control accuracy and reducing maintenance downtime.
As a core technology in green industry, this module plays a crucial role in converters for wind power generation and energy storage systems. By improving switching characteristics, it supports higher-frequency PWM control, thereby enhancing grid-connected power quality. Thanks to its excellent performance under high-frequency operation, this device reduces harmonic pollution to the grid and protects downstream drive equipment. Its efficient application in renewable energy integration fully responds to the modern industrial demand for a high-efficiency, low-carbon energy transition.
The FS450R12KE3/AGDR-71CS ABB IGBT Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB FS450R12KE3/AGDR-71CS IGBT Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB FS450R12KE3/AGDR-71CS IGBT Module Specs
General
- Manufacturer ABB
- Model FS450R12KE3/AGDR-71CS
- Condition New Original ready stock
- Product Family FS225R12KE3/AGDR-71CS,FS300R12KE3/AGDR-71CS,FS450R12KE3/AGDR-61CS
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- TIM Thermal Interface Material Upgrade: ABB officially recommends replacing traditional thermal grease with TIM (Thermal Interface Material) thermal interface material for more uniform heat dissipation and simplified installation.
- Control Cable Replacement: When replacing the IGBT module, the IGBT control cables (Ribbon Cables) must also be replaced. For R8 frames, it is recommended to use ABB's dedicated spare parts kit (e.g., 68689023).
- Driver Board Compatibility: The AGDR-71CS is a critical trigger board. During the upgrade, ensure its firmware or hardware version is compatible with the AINT series power boards (e.g., AINT-14C) in the original system.
- Tightening Torque Calibration: When installing the new module, a torque wrench must be used to strictly tighten the screws according to the manual requirements (typically 3.0-6.0 Nm) to prevent excessive contact resistance or damage to the package.
- DC/AC Terminal Connections: Ensure the IGBT's DC (bus) and AC (output to motor) terminals are securely fastened. Typically, an EconoPACK+ package is used, supporting low-inductance wiring.
- Gate Driver Board Connection: The AGDR-71CS driver board directly plugs into the IGBT module, receiving PWM signals from the control unit and converting them into power trigger signals.
- Control Signal Input: Connect to the inverter's drive distribution board (such as APDR or AINT board) via a 34-pin or specified flat cable.
- Grounding and ESD Protection: Installation must be performed in an ESD-protected environment, ensuring the drive module's ground potential is correctly connected to the system common ground to suppress noise.
- Motor Drive and Control: Primarily used in inverter units of ABB ACS800-02/04/104 and other inverters to drive industrial motors.
- Renewable Energy: Serving as a core power conversion component in wind power and photovoltaic grid-connected frequency converters.
- Power Systems: Used in uninterruptible power supplies (UPS) and high-power AC/DC power converters.
- Heavy Industry Transportation: Applied to rail transit traction control, engineering vehicle drives, and large servo drive systems.