Features:
- Motor Control and I/O Board for ACS800 drive units that use the RMIO board architecture.
- Uses a documented 24 V DC ±10% board power input.
- Provides connections for analog and digital signals, relay outputs, encoder-related interfaces, and optional modules as specified in ABB documentation.
The RMIO-11C is the control and I/O board used by applicable ABB ACS800 drive units. Its interfaces support the drive control, feedback, and external I/O connections defined for the RMIO hardware.
Compatibility must be checked against the exact ACS800 unit, board designation, connector arrangement, installed options, and application settings before replacement.
Current OEM lifecycle classification is not stated in the available ABB documentation. Availability is confirmed during quotation.
ABB RMIO-11C Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB RMIO-11C Motor Control and I/O Board Specs
General
- Manufacturer ABB
- Model RMIO-11C
- Condition New Original ready stock
- Product Family RMIO, ACS800 Drives
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Analog Inputs: The RMIO board provides one voltage analog input and two current analog inputs.
- Digital Inputs: Six programmable digital inputs are provided for control signals.
- Start Interlock: A separate digital input is provided for the start interlock function.
- Auxiliary Output: The board provides a 24 VDC ±10% auxiliary supply output.
- Output Capacity: The maximum auxiliary output current is 250 mA.
- Analog Input Isolation: The analog input section is specified with 500 VAC isolation.
- Input Check: Confirm whether each field signal is intended for the voltage input or one of the two current inputs before wiring.
- Digital Wiring Check: Match the six programmable digital inputs and the start interlock input to the applicable ACS800 control diagram.
- Power Check: Verify the 24 VDC ±10% auxiliary supply requirement and keep the connected load within the specified 250 mA limit.