Features:
- Strengthens weak control pulses to reliably drive industrial semiconductor devices and actuators.
- Supports ABB SAMI STAREN transmission equipment and early ABB drive, PLC, and DCS installations used in heavy industries.
- Operates across 0°C to +50°C with storage capability from -40°C to +70°C and supports 5% to 95% non-condensing relative humidity.
ABB SAFT123PAC serves an important role in industrial automation by providing pulse amplification between the control system and the power stage. The board increases the strength of low-level control signals before they reach high-power semiconductor devices, helping industrial equipment respond accurately to control commands. Signal isolation further contributes to dependable communication within the control architecture.
Industrial facilities operating long-life automation equipment continue to rely on ABB SAFT123PAC for maintaining legacy systems. The board is associated with the ABB SAMI STAREN transmission equipment series and is frequently installed in early SAMI variable frequency drives together with mature PLC and DCS control cabinets. Applications are commonly found in paper mills, steel plants, mining operations, and similar heavy industrial environments where proven control platforms remain in service.
ABB SAFT123PAC combines practical electrical capability with environmental durability. Rated for 6.3 A and 250 V, the board supports continuous operation between 0°C and +50°C while tolerating storage and transportation temperatures from -40°C to +70°C. Relative humidity from 5% to 95% without condensation allows the module to remain suitable for a wide range of industrial operating and storage conditions.
The SAFT123PAC ABB Pulse Amplifier Board may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB SAFT123PAC Pulse Amplifier Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB SAFT123PAC Pulse Amplifier Board Specs
General
- Manufacturer ABB
- Model SAFT123PAC
- Condition New Original ready stock
- Product Family SAFT120PAC,SAFT121PAC,SAFT122PAC
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Protection Standard: Meets IP00 bare board, unencased industrial grade.
- Electrical Isolation: Complies with high-voltage isolation specifications triggered by high-power thyristors.
- Certification Affiliation: Early Stromberg industrial standards and ABB quality certification.
- Manufacturing Compliance: Complies with the manufacturing standards for heavy industrial control panels in Sweden/Finland.
- Papermaking Drives: Control cabinets for multi-motor synchronous drive systems in large papermaking machines.
- Metallurgical Steel Rolling: Pulse triggering for high-power thyristor rectifiers and inverters in steel plants.
- Mine Hoisting: Routine maintenance and replacement of older SAMI frequency converters for mine hoists, etc.
- Equipment Retrofitting: Maintenance and transition of legacy industrial control systems before the transition to modern automation.
- Ambient Temperature Range: 0°C to +50°C continuous operation.
- Humidity Tolerance: 5% to 95% with no condensation.
- Heat Dissipation Requirements: Relying on forced air cooling in an industrial cabinet.
- Leakage Protection Requirements: Environments with conductive dust accumulation are strictly prohibited.