Features:
- Exact board label: Identified as SNAT 633 PAC Rev. A.
- Traceable code: The board code is 61049444.
- Pulse-amplifier role: Belongs to the SNAT 63X PAC family used with ACV700 GTO hardware.
SNAT633PAC provides a model-, code- and revision-specific identity for ACV700 pulse-amplifier service.
Revision control matters when ACV700 GTO inverters remain in service beside staged ACS880 retrofit sections.
The full label should therefore be captured before quotation, removal or installation work begins.
Apter Power can assist with quotation and documentation support for the ABB SNAT633PAC Pulse Amplifier Board.
ABB SNAT633PAC Pulse Amplifier Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Type marking: The manufacturer label reads SNAT 633 PAC.
- Board code: Use code 61049444 for the exact board identity.
- Revision: The identified unit is Rev. A.
- Board family: The board belongs to the SNAT 63X PAC pulse-amplifier family.
- Retained equipment: Identify every ACV700 GTO inverter that will remain during a staged retrofit.
- Revision rule: ABB requires the retained SNAT 63X PAC boards to be the newest revision.
- Interference risk: An outdated revision can affect retained ACV700 inverters near ACS880 sections.
- Project boundary: Do not infer newest-revision status from the SNAT 63X family name alone.
- Before removal: Capture the board code, revision and connector orientation.
- Before quotation: Match SNAT 633 PAC, code 61049444 and the installed ACV700 context.
- Before installation: Resolve any difference between the offered and installed revision.
- Before power: Follow the approved ACV700 isolation and commissioning procedure.
- ACV700 maintenance: Supports exact-board service in GTO inverter hardware.
- Staged modernization: Provides the revision checkpoint for retained ACV700 sections.
- Workshop evaluation: Links the board under test to code 61049444 and Rev. A.
- Spare planning: Allows revision-controlled stocking for a defined legacy inverter population.