Features:
- Frame transition: Frame C construction supports the documented 12 A rating
- Motor duty: 5.5 kW / 7.5 HP on a 380–480 V three-phase supply
- Service access: keypad and RS485 (DSI) support configuration and diagnostics
This model marks a mechanical change from the smaller Frame B drive, so retrofit space becomes an early decision rather than a final installation detail.
The control platform remains familiar, but fan airflow and cable access must be preserved around the taller and deeper enclosure.
The successor record introduces a 13 A PowerFlex 525 configuration, which makes the existing motor, protection, and parameter evidence essential to migration review.
Apter Power can coordinate 22B-D012N104 frame verification, official documents, quotation, and legacy-drive sourcing support.
22B-D012N104 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Envelope: compare the 13 × 26 × 18 cm body with the existing panel
- Cable route: maintain bend space and terminal access before drilling
- Handling: support the 4.3 kg drive during removal and installation
- Nameplate basis: enter verified voltage, frequency, and overload current
- Control mode: choose only the documented mode required by the load
- Acceptance: test direction, current, acceleration, and stop response under controlled conditions
- Successor row: compare 25B-D013N104 with the installed 12 A application
- Parameter review: do not copy the legacy file without line-by-line approval
- Outage plan: include mounting, terminals, network, safety, and restart tests
- Machine drives: operate a matched 5.5 kW / 7.5 HP motor
- Panel retrofits: retain documented Frame C clearance and ventilation
- Serial control: use supported RS485 (DSI) commands and diagnostics