Features:
- Small-motor rating: 2.3 A output for 0.75 kW / 1 Hp duty
- Integrated control: embedded EtherNet/IP and Safe Torque Off
- Frame A package: IP20 open enclosure with brake IGBT and no EMC filter
This catalog number identifies the 480 V-class, no-filter PowerFlex 525 configuration at the smallest rating in this batch.
Its motor match depends on current and duty as well as the 0.75 kW nameplate value.
Commissioning records should combine drive parameters, network identity, STO validation, motor data, and branch-circuit design.
For 25B-D2P3N104, Apter Power can review official drive data, motor-duty records, quotation scope, and procurement requirements.
Verified resources for 25B-D2P3N104:
Important Notice: Confirm the required application files, firmware, cables, accessories, and documentation in the quotation before ordering.
- Nameplate basis: compare 2.3 A output with the motor current at the actual supply voltage.
- Duty: account for acceleration time, overload, starts, and low-speed operation.
- Control method: select the approved PowerFlex 525 motor-control mode.
- Rotation test: decouple or secure the load before the first commanded run.
- Identity: record the drive IP address, node name, and controller ownership.
- AOP/EDS: use the documented profile or EDS for the installed revision.
- Parameter source: establish whether speed and start commands come from the network or terminals.
- Loss action: test the approved response to a communications interruption.
- Safety scope: use Safe Torque Off only within a validated safety function.
- Channel wiring: follow the official terminal and test procedure.
- Restart prevention: prove that torque remains inhibited until the machine sequence permits restart.
- Records: retain the validation result with the drive parameter backup.
- Small conveyors: regulate speed and acceleration for appropriately rated three-phase motors.
- Pumps and fans: apply variable-frequency control where the motor and load study supports it.
- Networked machines: integrate a compact drive into a documented EtherNet/IP control system.