Features:
- Integrated station: Combines EtherCAT coupling with standard and fail-safe channels.
- Safety communication: Uses FSoE to link the local channels with the safety controller.
- Compact control: Supports mixed standard and safe signals within one terminal assembly.
The terminal sequence and TwinCAT configuration define how every channel appears in the process image.
Safety address and FSoE settings should be retained before a coupler is removed.
Changes to safe wiring require a new authorised validation of the affected function.
Apter Power supports EK1914 quotations, official documentation, and TwinSAFE terminal-station planning.
Beckhoff EK1914 TwinSAFE EtherCAT Coupler with Integrated Safe I/O Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Sensor circuit: Confirm the approved input device and dual-channel architecture.
- Test pulses: Keep pulse-source assignment consistent with the safety project.
- Discrepancy: Review timing diagnostics when paired channels do not change together.
- Proof test: Exercise the complete protective function, not only the terminal indication.
- Dual switching: Check both controlled supply paths to the connected load.
- Safe state: Confirm the machine reaches the intended condition when the channel is disabled.
- Load circuit: Inspect current, suppression, commons, and external contactor feedback.
- Topology: Keep the coupler and terminal sequence aligned with the TwinCAT project.
- Safety address: Verify address settings before enabling communication.
- Diagnostics: Use EtherCAT and TwinSAFE messages to separate network and field faults.
- Restart: Clear faults only after the cause has been corrected and validated.
- Compact safety: Combines local standard and safe signals in one EtherCAT station.
- Guard functions: Supports validated sensors and actuators used in machine protection.
- Distributed terminals: Extends TwinSAFE control to field-mounted IP20 terminal assemblies.