Features:
- Interface Between the Proximity Probe Housing and Machinery Monitoring System
- Combines Capability of Proximity Sensing with Connector Protection Support
- Operates in Conjunction with the 3300 XL and Standard Monitoring Equipment
The 24701-34-05-30-036-04-02 operates as the Proximity Probe Housing Assembly in a monitoring system, providing reliable displacement measurement to all connected modules within the system. It continuously converts incoming proximity signals using the 3300 XL 8mm probe with 20 in (0.5 m) cable length to regulated output and distributes this signal through the connector interface to support steady state operation of all monitors and modules. Seamless signal transfer is standard with the 24701-34-05-30-036-04-02, however using the 3.0 in Standoff Adapter will allow optimal probe penetration of 3.6 in in the event of varying installation depths. The 24701-34-05-30-036-04-02 has made improvements in several areas over previous proximity probe designs in addition to incorporating universal 3/4-14 NPT mounting thread capability within the monitoring system.
The 24701-34-05-30-036-04-02 provides essential sensing functions common to the entire system, and is a critical component of the measurement path, directly affecting the proper, normal operation of the overall monitor system. One 24701-34-05-30-036-04-02 proximity probe assembly is required per measurement point depending on the desired monitoring configuration. The 24701-34-05-30-036-04-02 occupies a compact installation profile in the system and is always located at the measurement point with 3/4-14 NPT thread (the dedicated probe housing position).
For extended penetration applications, the monitoring system requires the 24701-34-05-30-036-04-02 with 3.6 in probe penetration configured with the 3.0 in standoff adapter. In addition to standard probe operation, the extended configuration also performs accurate measurement at greater depths. The 24701-34-05-30-036-04-02 extended penetration design executes measurement using the internal probe specified in the housing options. Using this method, the proximity probe system continually monitors the health of rotating machinery. If the system detects that the probe is no longer providing stable output (outside configured gap voltage/tolerance levels), it will automatically adjust the measurement parameters and place an event in the System Event List.
The 24701-34-05-30-036-04-02 Bently Nevada Proximity Probe Housing Assembly may still be available for purchase and support from authorized distributors beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 24701-34-05-30-036-04-02 Proximity Probe Housing Assembly Manual, Datasheets, Application Areas, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 24701-34-05-30-036-04-02 Proximity Probe Housing Assembly
General
- Manufacturer GE / Bently Nevada
- Model 24701-34-05-30-036-04-02
- Condition New Original ready stock
- Product Family 24701-34-05-30-036-04-01,24701-34-05-30-036-04-03
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.