- 303 stainless-steel body with a 304 stainless-steel probe sleeve
- 29.0 in penetration supplied without probe, cable, or standoff adapter
- 3/4-14 NPT mounting thread with reducer, seal grip, plug, and grommets
Bently Nevada 24701-00-00-00-290-03-02 is a stainless-steel housing for external installation of a compatible reverse-mount proximity probe.
The decoded order code specifies no probe, no probe cable, no standoff adapter, 29.0 in penetration, the 03 cable-seal fitting set, and a 3/4-14 NPT mounting thread.
Select the correct probe and cable separately, verify the complete transducer system, and support the long sleeve near the probe before commissioning.
Availability, condition, price, and shipping time for 24701-00-00-00-290-03-02 are confirmed during quotation.
Bently Nevada 24701-00-00-00-290-03-02 Proximity Probe Housing Assembly Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The three 00 fields specify no probe, cable, or standoff adapter
- 290 specifies 29.0 in probe penetration
- 03 and 02 specify the cable-seal fitting set and 3/4-14 NPT mounting thread
- 303 stainless-steel body for industrial machinery installations
- 304 stainless-steel sleeve for the selected penetration length
- Mechanical design permits approximately ±0.5 in final probe adjustment
- Select the compatible reverse-mount probe and cable separately
- Support the 29.0 in sleeve near the probe to prevent resonance
- Confirm mounting thread, cable diameter, sealing, probe gap, and target material
- External mounting of compatible reverse-mount proximity probes
- Intrinsically safe machinery proximity measurement with an approved complete system
- Long-sleeve installations passing through an inner bearing housing with probe support and oil sealing