- Short-penetration configuration for machinery with a shallower probe mounting interface
- External access supports probe gapping and replacement without opening the machine casing
- Type 4X and IP66 enclosure protects the probe adjustment and cable connection
31000-16-05-00-033-03-02 provides an externally accessible mounting arrangement for proximity measurement on rotating machinery.
Its 3.3-inch penetration distinguishes this configuration from longer 31000 assemblies. Confirm that the shorter sleeve can position the probe within its adjustment range while maintaining secure thread engagement and access for maintenance.
The assembly contains the probe and housing hardware for the machine interface. The compatible extension cable, Proximitor Sensor, monitor channel, and any required safety barriers are selected separately as parts of the complete measurement chain.
Availability, condition, price, and shipping time for 31000-16-05-00-033-03-02 are confirmed during quotation.
Bently Nevada 31000-16-05-00-033-03-02 Proximity Probe Housing Assembly Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The 3.3 in sleeve sets the installed probe depth through the machine case
- The 3/4-14 NPT outer sleeve provides the machine mounting interface
- The ±0.5 in sleeve adjustment range supports final probe gapping
- The installed 3300 XL probe has a 0.5 m lead
- The option-03 seal grip supports three published cable-diameter ranges
- The probe identity should be recorded because its label will not remain outside the 3.3 in sleeve
- No standoff adapter is included in this configuration
- The 3.3 in penetration is below the 12 in additional-support threshold
- The housing must be paired with the external matched 3300 XL extension cable and Proximitor Sensor
- Short-penetration radial probe installation on rotating machinery with a shallow machine-case interface
- Externally accessible shaft-position or vibration measurement where the probe must be gapped and serviced from outside the casing
- API 670 machinery-monitoring installations requiring a Type 4X/IP66 proximity-probe housing