Features:
- Through-case mounting design with 3.7-inch probe penetration allows external gap adjustment and probe replacement without machine disassembly.
- PPS thermoplastic housing with stainless steel components provides excellent corrosion resistance for long-term durability in harsh industrial environments.
- Versatile cable entry options include a seal grip with three grommet sizes, a 3/4-14 NPT fitting, a stainless steel reducer, and two plugs for flexible field wiring.
The 31000-28-05-00-037-03-02 is specifically designed for applications where the probe must be mounted through the machine casing—a common requirement for radial vibration and Keyphasor measurements on large rotating equipment. Its through-case design provides external access to the probe and extension cable, allowing technicians to adjust probe gap or replace the probe entirely without disassembling the machine.
The 31000-28-05-00-037-03-02 is constructed from materials chosen for long-term reliability in harsh industrial conditions. The main housing is molded from polyphenylene sulfide (PPS), an advanced thermoplastic with excellent resistance to chemicals, moisture, and temperature extremes.
The 31000-28-05-00-037-03-02 is equipped with a comprehensive set of fittings to accommodate a variety of field installation scenarios. The included cable seal grip comes with three grommet sizes, covering the most common cable diameters encountered in industrial wiring.
The 31000-28-05-00-037-03-02 Bently Nevada English Proximity Probe Housing Assemblies may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 31000-28-05-00-037-03-02 English Proximity Probe Housing Assemblies Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 31000-28-05-00-037-03-02 English Proximity Probe Housing Assemblies Specs
General
- Manufacturer GE / Bently Nevada
- Model 31000-28-05-00-037-03-02
- Condition New Original ready stock
- Product Family
31000-30-05-00-037-03-02,31000-31-05-00-037-03-02
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Radial Vibration Monitoring: Mounted on a fluid thin-film bearing housing, it measures the dynamic vibration of the shaft.
- Keyphasor: Monitors the keyways on the shaft, providing speed and phase signals.
- Typical Equipment: Key industrial equipment such as steam turbines, compressors, pumps, motors, and generators.
- Industry Standards: Fully compliant with API 670 standards for externally mounted probe enclosures.
- Protection Rating: The enclosure is NEMA 4X and IP66 certified, providing protection against hose jets and corrosive environments.
- Hazardous Area Certification: The built-in probe has multi-national explosion-proof certifications (defined by code 28), and the enclosure material is CENELEC EN50014 electrostatic dissipation certified, suitable for hazardous areas.
- Probe Compatibility: This model comes pre-installed with a 3300 XL 8 mm probe, replacing or upgrading older 7200 series probe systems.
- System Integration: Requires the 3300 XL Proximitor sensor. Since the probe cable is 0.5 meters, a 4.5-meter or 8.5-meter extension cable is typically required to form a standard 5-meter or 9-meter system.
- Shell Material: Constructed from glass fiber reinforced polyphenylene sulfide (PPS) and stainless steel, offering excellent chemical resistance.