Features:
- M14 x 1.5 metric thread with armor protection provides enhanced mechanical durability for demanding industrial installations requiring metric mounting standards.
- 30 mm overall case length with 5.0 meter integral cable combines a compact mounting footprint with extended reach for remote monitoring applications.
- Patented TipLoc molding and CableLoc design with 330 N pull strength ensure robust probe tip bonding and secure cable retention in high-vibration environments.
The 330704-000-030-50-02-00 packs armor protection into a 30 mm case. M14 x 1.5 threads fit metric ports, while the armor shields against impact and crushing. For tight spots where longer probes won't fit, this compact armored probe delivers 11 mm measurement capability.
Five meters of integral cable lets you place the Proximitor sensor away from the machine. No separate extension cable needed. The 330704-000-030-50-02-00 simplifies wiring in large turbine and compressor installations where the control cabinet sits remote from the measurement point.
TipLoc molding bonds the probe tip to the body—no separation under vibration. CableLoc provides 330 N pull strength, keeping the cable attached during rough pulls. The 330704-000-030-50-02-00 survives installation abuse and years of operation.
The 330704-000-030-50-02-00 Bently Nevada 3300 XL 11 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330704-000-030-50-02-00 3300 XL 11 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330704-000-030-50-02-00 3300 XL 11 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330704-000-030-50-02-00
- Condition New Original ready stock
- Product Family
330704-000-030-50-01-00,330704-000-030-50-11-00,330704-000-030-50-02-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Axial (Thrust) Position Measurement: Monitoring the forward and backward displacement of the steam turbine and compressor shafts.
- Ramp Differential Expansion: Measuring the relative thermal expansion between the steam turbine rotor and casing.
- Reciprocating Compressor Monitoring: Used for piston rod position or rod drop measurement.
- Phase and Speed Reference: Provides keyphasor signals or is used for zero-speed monitoring.
- Environmental Protection: IP67 protection rating; probe tip made of PPS material; housing made of AISI 304 stainless steel.
- Sealing Protection: The probe is designed with a Viton® O-ring seal, capable of withstanding differential pressure and preventing leakage of process media.
- Signal Integrity: Gold-plated ClickLoc™ connectors ensure a stable connection and reduce signal loss.
- Abnormal Alarm: When used with a Proximitor sensor, it can monitor faults such as signal interruption and probe gap abnormalities (outside OK limits).
- Replacement for the 7200 Series: This system is designed to replace older 7200 Series 11mm and 14mm sensor systems.
- Upgrade Requirements: When upgrading from the 7200 Series, the probes, extension cables, and Proximitor sensors must be replaced simultaneously, and the monitoring instrument's configuration parameters must be updated.