Features:
- Armored M14 x 1.5 thread with 100 mm case for deep mounting in metric ports.
- Combines Capability of AC/DC Power Conversion with Redundant Power
Support
- Country-specific approvals for Russia eliminate local certification delays.
The 330704-000-100-10-01-RU delivers the 4.0 mm linear range of 11 mm probes with armor protection. M14 x 1.5 threads fit standard metric ports, while the 100 mm case provides balanced reach.
Country-specific approvals mean no waiting for local certification. Install the 330704-000-100-10-01-RU directly in Russian industrial plants—paperwork done at the factory.
TipLoc prevents tip separation. CableLoc provides 330 N pull strength. The locknut with safety wire holes adds positive locking. This probe stays together where others come apart.
The 330704-000-100-10-01-RU Bently Nevada 3300 XL 11 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330704-000-100-10-01-RU 3300 XL 11 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330704-000-100-10-01-RU 3300 XL 11 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330704-000-100-10-01-RU
- Condition New Original ready stock
- Product Family
330704-000-100-10-02-RU,330704-000-100-10-12-RU,330704-000-100-10-01-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Large steam turbines and gas turbines: Monitoring rotor differential expansion, i.e., the relative displacement between the rotor and casing caused by thermal stress.
- Hydraulic generator sets: Monitoring radial vibration and structural displacement of large-diameter shafts.
- Large reciprocating compressors: Used to monitor piston rod drop and diagnose support ring wear.
- Industrial process pumps: Monitoring axial thrust position under high loads.
- Wide linear range: Offers a 4.0 mm (160 mils) linear measurement range, twice that of the standard 8 mm probe (2.0 mm), allowing for greater machine displacement without signal loss.
- High Sensitivity Stability: Standard sensitivity is 3.94 V/mm (100 mV/mil).
- Signal Transmission Efficiency: Equipped with a 1.0 m (10 dm) probe cable (Option-10) using a gold-plated ClickLoc™ connector, ensuring minimal contact resistance at the connection to the extension cable, reducing signal attenuation and noise interference.
- Thermal Expansion Monitoring: During power plant unit start-up or shutdown, monitor the rate of thermal expansion of various components to prevent excessive differential expansion from causing friction and scraping between the rotor and stator.
- Heavy-Duty Thrust Bearing Monitoring: In equipment with heavy thrust bearing loads, monitor minute axial movement of the shaft to prevent thrust bearing damage.
- Russian-Speaking Region Projects: With RU certification, this model is the preferred configuration for equipment exported to Eurasian Economic Union (EAEU) countries such as Russia and Kazakhstan, ensuring compliance with local metrology and safety standards.