Features:
- The 330101-00-11-10-02-05 features a 3/8-24 UNF thread configuration with armor protection.
- This model includes a miniature coaxial ClickLoc™ connector for secure, reliable connections.
- The 330101-00-11-10-02-05 offers rugged PPS plastic tip with thicker coil encapsulation.
The 330101-00-11-10-02-05 provides essential monitoring functions common to the 3300 XL series, and is a critical component directly affecting the proper operation of the overall machinery protection system. It can be configured with an optional FluidLoc cable option, which prevents oil and other liquids from leaking out of the machine through the cable's interior. The 330101-00-11-10-02-05 also supports connector protectors for increased environmental protection, recommended for all installations, especially when cables must run through restrictive conduit.
Bently Nevada recommends the use of 8 mm probes like the 330101-00-11-10-02-05 when possible to provide optimal robustness against physical abuse. The armored construction of this probe adds an additional layer of protection against mechanical damage during installation and operation. The 330101-00-11-10-02-05 delivers reliable vibration and position monitoring while maintaining the rugged construction expected from the 3300 XL series.
The 330101-00-11-10-02-05 is fully backward compatible and interchangeable with non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe for applications where an 8 mm probe is too large for available mounting space. The 330101-00-11-10-02-05 ensures consistent performance while addressing fluid leakage concerns through optional FluidLoc technology and providing enhanced durability through armored construction.
The 330101-00-11-10-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-11-10-02-05 3300 XL 8 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330101-00-11-10-02-05 3300 XL 8 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330101-00-11-10-02-05
- Condition New Original ready stock
- Product Family
330101-00-11-10-01-05,330101-00-11-10-11-05,330101-00-11-10-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Radial Vibration Monitoring: Mounted on a bearing housing, it monitors the radial runout of the shaft to diagnose imbalance, misalignment, or bearing wear.
- Axial Displacement Monitoring: It measures the axial movement of the shaft relative to the thrust bearing, preventing rotor-stator collisions (thrust protection).
- Speed and Phase Reference: Used as a keyphasor, it provides speed signals and a phase reference for vibration analysis via keyways on the monitoring shaft.
- System Compatibility: It must be used with a 3300 XL series preamplifier (such as 330180). During configuration, ensure that the total length of the probe, extension cable, and preamplifier is consistent (typically 5 meters or 9 meters).
- Gap Setting: Physical gap setting is required during installation, usually measured by measuring the DC voltage output of the preamplifier with a voltmeter (the standard linear center point is typically -10 VDC).
- Monitor programming: In the 3500 frame or Orbit 60 software, the input channel must be configured as "3300 XL 8mm" and the correct scale factor must be set. The standard value is usually 7.87 V/mm (200 mV/mil).
- Power Industry: Steam turbine generator sets, feedwater pumps, cooling tower fans.
- Oil & Gas & Chemical Industry: Centrifugal compressors, reciprocating compressors (measuring rod drop), gearboxes.
- Metallurgy & Mining: Large blowers, crushers, coal mills.
- Extreme Environments: Due to its multiple explosion-proof certifications, this model (05 certification) is commonly found in flammable and explosive Zone 0/1 areas such as oil refineries and natural gas processing plants.