Features:
- 4.3-inch case length fits standard mounting ports originally sized for 5 mm probes, enabling easy upgrades.
- 2.0-meter integral cable provides flexible Proximitor placement without a separate extension cable.
- CSA, ATEX, and IECEx approvals allow global hazardous area deployment without region-specific variants.
The 330101-00-43-20-02-05 replaces 5 mm probes without drilling new holes. Its 4.3-inch case matches the footprint of older probes, while the 3/8-24 UNF thread fits existing ports. Gain 8 mm durability—swap, don't re-engineer.
At 2.0 meters, the integral cable reaches remote cabinets and junction boxes. No extension cable needed. The 330101-00-43-20-02-05 simplifies wiring in large machinery where the Proximitor sensor must sit away from the probe.
CSA for North America, ATEX for Europe, IECEx for international sites. The 330101-00-43-20-02-05 moves with your equipment. No region-specific variants, no compliance delays.
The 330101-00-43-20-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-43-20-02-05 3300 XL 8 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330101-00-43-20-02-05 3300 XL 8 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330101-00-43-20-02-05
- Condition New Original ready stock
- Product Family
330101-00-43-20-01-05,330101-00-43-20-11-05,330101-00-43-20-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Vibration and Displacement Monitoring: Measures shaft vibration and position/displacement in hydrodynamic bearing machines (such as steam turbines, compressors, motors, and pumps).
- Keyphasor: Provides speed measurement and phase reference signals for mechanical diagnostic analysis.
- Industrial Applications: Widely used in harsh industrial environments requiring high-reliability monitoring, such as oil and gas, power generation, and chemical industries.
- Passive Component Characteristics: The probe consists of an inductor coil and cable; its performance depends on its physical structure and the electrical properties of the materials.
- System Updates: Related "updates" typically occur on the connected 3300 XL Proximitor sensor or 3500 monitoring system module. To improve monitoring capabilities, firmware updates to the backend monitoring host or replacement with a higher-performance sensor are usually required.
- Compatibility: This series offers high interchangeability, allowing direct replacement of older 3300 series 5mm or 8mm components without recalibration.
- Gapping Setting: It is generally recommended to set the voltage between the probe and the target axis to approximately -9 Vdc (about 1.27 mm or 50 mils) to ensure optimal linearity measurement.
- System Connection: Requires a 3300 XL Proximitor sensor. The default calibration target material is AISI 4140 steel. If the target material is another material, coefficient compensation must be performed in the backend monitoring software.
- Software Programming: In the 3500 architecture, configure the probe type, linear scaling factor (ISF), and alarm values using the 3500 Rack Configuration Software.