Features:
- 3/8-24 UNF thread with 0.0-inch unthreaded length and 4.9-inch overall case provides a compact profile for standard-depth mounting ports.
- FluidLoc cable technology with integrated connector protector blocks oil migration and seals the connection without field-applied tape.
- Complete backward compatibility with non-XL 3300 series 5 mm probes allows direct replacement where 8 mm body fits the existing mounting hole.
The 330101-00-49-10-12-05 fits where longer probes won't. Its 4.9-inch case and zero unthreaded length slide into standard-depth mounting ports without protruding into covers or adjacent hardware. For retrofits originally sized for 5 mm probes, this compact 8 mm probe upgrades durability without casing modifications.
FluidLoc is built into the cable, not added in the field. The internal barrier stops oil from wicking through, while the pre-installed connector protector seals the connection against moisture. No silicone tape, no sealing compounds—just install and trust the factory protection.
The 330101-00-49-10-12-05 swaps directly with non-XL 3300 series 5 mm and 8 mm probes. Keep your existing cabling and mounting hardware. Change only the probe and gain FluidLoc fluid containment. For facilities with mixed probe inventories, this backward compatibility simplifies spare parts management.
The 330101-00-49-10-12-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-49-10-12-05 3300 XL 8 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330101-00-49-10-12-05 3300 XL 8 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330101-00-49-10-12-05
- Condition New Original ready stock
- Product Family
330101-00-49-10-01-05,330101-00-49-10-11-05,330101-00-49-10-12-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Deep Hole or Thick Wall Mounting: The full-thread construction allows for a wide range of depth adjustments within the mounting bracket or machine housing, making it ideal for bearing housings of varying thicknesses.
- Precision Gap Adjustment: Full-thread design provides finer feed control in applications requiring precise setting of the gap voltage between the probe tip and the shaft surface.
- Key Rotary Machinery: Like other products in the series, it is widely used in turbines, compressors, and large pumps in the power, oil refining, and chemical industries for monitoring radial vibration and axial displacement.
- Important Note: The 330101 series probes are purely analog sensors and do not contain a microprocessor or computing circuitry.
- No Firmware Updates: The probes themselves do not have firmware and therefore do not require or support any software updates. Their performance depends entirely on their physical structure and material properties (such as the vortex coil and ceramic tip).
- System-Level Updates: While the probes themselves do not require updates, the 3500 monitoring system cabinet or proximitor connected to them may require firmware upgrades to support newer communication protocols or diagnostic functions.
- Mechanical Gap Calibration:This is the most important configuration step. During installation, the preamplifier's output voltage must be monitored. The gap is typically adjusted until the output is approximately -10.0 VDC (corresponding to the linear center point).
- Preamplifier Matching: Ensure that the probe cable length (1.0 meter for this model) plus the total length of the extension cable matches the system length (e.g., 5m or 9m) specified on the 3300 XL preamplifier label.