Features:
- Standard-mount 3300 XL 8 mm probe with 3/8-24 UNF thread
- 0.0 in unthreaded length, 8.5 in overall case length, and 1.0 m total length
- ClickLoc connector protector, armored cable configuration, and CSA/ATEX/IECEx approvals
The probe forms the sensing element of a 3300 XL 8 mm proximity transducer system. Its output is used with a matching extension cable and Proximitor sensor for non-contact position and vibration measurements.
The complete ordering code fixes the mechanical case dimensions, integral lead length, connector protection, cable armor, and approval options. These options should be matched exactly during replacement.
Verify the complete ordering code, cable protection, connector, and matching 3300 XL system components before installation.
Bently Nevada 330102-00-85-10-01-05 Manuals, Datasheets and Product Links
Documentation Note: This document is provided for technical reference. Please confirm the applicable product configuration and document revision before ordering.
Bently Nevada 330102-00-85-10-01-05 Armored Proximity Probe Specs
General
- Manufacturer Baker Hughes / Bently Nevada
- Model 330102-00-85-10-01-05
- Condition New
- Product Family 3300 XL 8 mm Proximity Transducer System, 3300 XL 8 mm Probe
- 3/8-24 UNF standard-mount case
- 0.0 in unthreaded length and 8.5 in overall case length
- 1.0 m total probe length
- Flexible AISI 302 or 304 stainless-steel armor with FEP outer jacket
- 2 mm (80 mils) linear range for the standard 3300 XL 8 mm system
- 7.87 V/mm (200 mV/mil) incremental scale factor
- Recommended radial-vibration gap: approximately 1.27 mm (50 mils) / -9 Vdc
- Standard probe operating and storage range: -52°C to +177°C
- Maximum 3/8-24 thread engagement: 0.563 in
- Minimum cable bend radius: 25.4 mm (1.0 in)
- ClickLoc connectors are tightened finger-tight
- Verify extension cable and Proximitor sensor system length before installation