Features:
- 330104-00-05-90-02-00 provides 9-meter armored metric probe with M10x1 thread and 50mm case.
- Zero unthreaded length with full armor for long-distance monitoring in harsh industrial environments.
- TipLoc and CableLoc deliver 330N pull strength with gold ClickLoc connectors for reliable vibration monitoring.
The 330104-00-05-90-02-00 is specifically configured for applications requiring extended cable length between the probe and the Proximitor sensor, with a total length of 9.0 meters (29.5 feet) designed to pair exclusively with 9-meter Proximitor sensors (330180-90 panel mount, 330180-91 DIN mount, or 330180-92 no mounting hardware). This extended length allows the Proximitor sensor to be mounted far from the probe location, such as in a remote control room while the probe monitors machinery in a hazardous or inaccessible area. The zero unthreaded length (00) means the M10 x 1 threads begin immediately at the probe tip, while the 50 mm case length provides a compact probe body.
The 330104-00-05-90-02-00 combines full stainless steel armor protection with standard cable configuration. The flexible AISI 302 stainless steel armor with PFA outer jacket surrounds the cable, providing exceptional resistance to crushing from heavy equipment, abrasion against sharp metal edges, cutting from tools, and impact damage from falling objects. This makes the 330104-00-05-90-02-00 suitable for demanding turbomachinery installations where cables are routed along machine frames or through cable trays with other heavy cables. The armored construction is especially valuable over the long 9.0-meter cable run, as the cable may pass through multiple cabinets, cable trays, or conduit systems where mechanical damage is possible.
The 330104-00-05-90-02-00 incorporates multiple patented design features for maximum durability in harsh industrial environments. TipLoc molding creates a permanent, robust bond between the probe tip and the probe body, eliminating a common failure point found in older designs where the tip could become loose or separate due to vibration or thermal cycling. This is especially critical in high-vibration applications such as gas turbines, steam turbines, and high-speed compressors. CableLoc technology secures the probe cable with 330 N (75 lbf) pull strength, preventing accidental disconnection during installation or machine operation.
The 330104-00-05-90-02-00 Bently Nevada Proximity Probe may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-05-90-02-00 Proximity Probe Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330104-00-05-90-02-00 Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-00-05-90-02-00
- Condition New Original ready stock
- Product Family
330104-00-05-90-02-05,330104-00-05-90-02-CN,330104-00-05-90-02-RU
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Fluid-Film Bearing Machinery: Installed on critical assets such as steam/gas turbines, centrifugal compressors, major industrial pumps, and power plant generators to track internal shaft dynamics.
- Radial Vibration Analysis: Measures the orbital dynamic motion of the shaft within its hydrodynamic bearings, revealing faults like unbalance, misalignment, or mechanical looseness.
- Axial Position (Thrust) Monitoring: Monitors the axial float or displacement of the shaft relative to the thrust bearing, preventing destructive rotor-to-stator friction or crashes.
- Speed & Phase Reference (Keyphasor): Detects a once-per-turn notch or keyway on a spinning shaft to calculate precise machine RPM and phase angles for diagnostic mapping.
- Submerged Oily and Humid Environments: The probe tip is molded from high-performance Polyphenylene Sulfide (PPS), and the body is constructed from AISI 304 Stainless Steel (SST). This protects the core sensor electronics from continuous exposure to synthetic lubrication oils, hot water, steam, and corrosive chemical vapors.
- Wide Temperature Thresholds: The standard probe cable and tip can continuously operate across an aggressive temperature envelope spanning from -51 °C to +177 °C (-60 °F to +350 °F).
- High-Pressure Seals: The front-end tip utilizes a patented TipLoc molding method, establishing a robust pressure seal between the tip assembly and the stainless steel case to prevent machine gases or fluids from wicking into the electronics.
- Mechanical Stress Resistivity: The integrated CableLoc design reinforces the structural attachment point, allowing the probe cable junction to safely endure pulling forces of up to 330 N (75 lbf) during routing or deep-well installation.
- Calibration & System Matching: This specific probe features an intrinsic 9.0-meter total length. It must connect directly to a 9.0-meter 3300 XL Proximitor Sensor without any extension cable. Adding an extension cable will alter the loop impedance, ruin the standard calibrated scale factor (-200 mV/mil or 7.87 V/mm), and invalidate accuracy.
- Gap Voltage Conversion: The Proximitor supplies an RF signal to the probe, generating an eddy current field at the tip. As the shaft moves, the Proximitor measures the gap voltage change and converts it into an easily readable linear DC/AC signal.
- Machinery Protection Systems (e.g., Bently Nevada 3500): The output from the Proximitor is routed directly to rack monitors. These systems continuously track thresholds for Alert (Early Warning) and Danger (Shutdown) parameters.
- Continuous "OK" Loop Monitoring: If the cable is severed or shorted, the system registers a "NOT OK" hardware error. It isolates the channel and suppresses false alarms to ensure a damaged cable does not trigger an accidental factory trip.
