Features:
- Detection Interface Between the Probe Tip and Observed Conductive Surface
- Integrates Eddy Current Sensing Capability with Static and Dynamic Measurement Support
- Functions Within the Complete 3300 XL 8 mm Proximity Transducer System
The 330104-00-11-50-02-00 serves as the 3300 XL 8 mm Proximity Probe in the 3300 XL transducer system, providing accurate distance measurement between the probe tip and the observed conductive surface. It generates an output voltage directly proportional to this gap distance and supports measurement of both static (position) and dynamic (vibration) values. The 330104-00-11-50-02-00 features an M10 x 1 thread with armor, an unthreaded length of 0 mm, an overall case length of 110 mm, and a total length of 5.0 meters (16.4 feet). The probe is equipped with a miniature coaxial ClickLoc connector and uses standard cable, with no agency approval required. The 330104-00-11-50-02-00 delivers the most advanced performance in Bently Nevada's eddy current proximity transducer systems and is fully compliant with the American Petroleum Institute's (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability.
The 330104-00-11-50-02-00 provides essential sensing functions as part of the complete 3300 XL 8 mm Proximity Transducer System, and is a critical component of the measurement path, directly affecting the proper, accurate operation of the overall vibration and position monitoring system. The 330104-00-11-50-02-00 must be used in conjunction with one 3300 XL extension cable and one 3300 XL Proximitor Sensor to form a complete functional transducer system. The 330104-00-11-50-02-00 supports complete interchangeability with other 3300 XL 8 mm system components, eliminating the need to match or bench calibrate individual components.
For applications requiring compatibility with legacy installations, the 330104-00-11-50-02-00 and other 3300 XL 8 mm Transducer System components are backward compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe such as the 330104-00-11-50-02-00 is too large for the available mounting space.
The 330104-00-11-50-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-11-50-02-00 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-11-50-02-00 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330104-00-11-50-02-00
- Condition New Original ready stock
- Product Family 330104-00-11-50-02-05,330104-00-11-50-02-CN,330104-00-11-50-01-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration Monitoring: Tracks the dynamic motion of rotating shafts relative to the bearing housing to spot imbalances or misalignments.
- Axial (Thrust) Position Measurement: Monitors the longitudinal movement of shafts to prevent critical internal contact between rotors and stators.
- Shaft Radial Position (Eccentricity): Detects physical bearing wear and oil-film breakdown by observing average shaft position changes.
- Keyphasor® and Speed References: Tracks shaft rotation speed and provides phase reference marks for complex vibration analysis.
- Direct Signal Output: Generates an output voltage precisely proportional to the physical distance between the probe tip and a conductive surface, typically at a scale factor of 7.87 V/mm (200 mV/mil).
- Hardware Integration: Plugs directly into a 3300 XL Proximitor Sensor via its ClickLoc connector. The sensor converts raw impedance changes into an analog voltage signal.
- System Connectivity: The output integrates seamlessly with plant-wide platforms like the Bently Nevada 3500 Machinery Protection System or external Distributed Control Systems (DCS) and PLCs. This path enables automatic alarms and emergency machine trips when safety thresholds are crossed.
- Probe Tip and Cable Temperature: Operates safely from -52 °C to +177 °C (-62 °F to +351 °F).
- Proximitor Sensor Temperature: Operates safely from -51 °C to +100 °C (-60 °F to +212 °F).
- Humidity Performance: Highly moisture resistant, showing less than a 3% change in Average Scale Factor (ASF) after 56 days of exposure to 93% relative humidity per IEC standards.
- Low-Temperature Constraint: Continuous exposure below -34 °C (-30 °F) can degrade the internal Viton® pressure seal.