Features:
- Optimized for Restricted Side-View Clearances and Narrow Counterbores
- High-Fidelity Tracking on Small Rotating Shafts and Flat Surfaces
- Rugged FEP Chemical Insulation with Secure ClickLoc Connections
The Bently Nevada 330901-00-14-10-02-00 features a compact 5mm tip design with an optimized eddy current field footprint that drastically reduces side-wall cross-talk. This allows field engineers to achieve highly reliable vibration measurements inside tight mechanical pockets and narrow counterbores down to 9.5 mm (0.375 in) without suffering from early signal degradation.
Leveraging a specialized narrow-view sensor face, the Bently Nevada 330901-00-14-10-02-00 maintains a uniform scale factor of 7.87 V/mm (200 mV/mil) over its entire 1.5mm dynamic displacement range. It delivers stable, repeatable calibration metrics when targeting small rotating surfaces such as high-speed machine shafts smaller than 51 mm (2.0 in).
The integrated 1.0-meter 75 Ω coaxial cable on the Bently Nevada 330901-00-14-10-02-00 is jacketed in premium fluoroethylene propylene (FEP) to resist harsh process fluids and compressor oils. Terminated with a gold-plated brass ClickLoc connector, it physically locks in place to withstand machinery vibration up to a rated 220 N pull strength.
The 330901-00-14-10-02-00 Bently Nevada 3300 NSv Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330901-00-14-10-02-00 3300 NSv Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330901-00-14-10-02-00 3300 NSv Proximity Probe
General
- Manufacturer GE / Bently Nevada
- Model 330901-00-14-10-02-00
- Condition New Original ready stock
- Product Family 330901-11-25-10-01-00,330901-10-25-10-02-00,330901-00-90-05-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Restricted Industrial Compressors: Extensively deployed within centrifugal air and process gas compressors where very tight spatial dimensions prohibit standard 8mm proximity instrumentation.
- Industrial Refrigeration Systems: Ideal for monitoring high-speed refrigeration screw compressors, delivering precision non-contact vibration insights despite compact mechanical boundaries.
- Fluid-Filmed Bearing Machinery: Tailored for small turbomachinery employing fluid bearings where tight geometries demand a miniaturized probe footprint.
- High-Speed Tachometer References: Configured as a high-fidelity speed sensor or Keyphasor reference on small-diameter shafts to capture phase and timing data on tight rotating assets.
- Dynamic Radial Vibration Tracking: Captures real-time shaft dynamic motion profiles, allowing plant operators to identify premature rotor unbalance, misalignment, or bearing wear indicators.
- Precision Axial Position Feedback: Monitors exact thrust-bearing clearances and rotor displacement, providing critical safety interlocks to prevent mechanical failures.
- Wide-Band Frequency Transduction: Delivers high-speed analog voltage logging from 0 to 10 kHz, ensuring that high-frequency vibration components and sub-synchronous harmonics are captured.
- Immunity to Cross-Talk Overlap: Specifically designed to run close to nearby metal boundaries or adjacent sensors, preserving signal integrity down to a 23 mm (0.9 in) spacing limit.
- SIL Functional Safety Rating: Certified for direct integration into Critical Safety Instrumented Systems, supporting SIL 2 paths natively and SIL 3 operations under redundant conditions.
- Zone 0 Intrinsic Safety Compliance: Natively designed to operate safely in hazardous locations with explosive gas mixtures when isolated via approved barriers.
- CE Mark RFI and EMI Protection: Achieves full European CE markings due to robust immunity against nearby high-frequency radio and electromagnetic emissions, preventing signal corruption without special shielding.
- Viton O-Ring Fluid Containment: Incorporates a robust Viton O-ring seal to maintain a high-quality physical barrier, preventing process gases or turbine oils from leaking out of the machine casing.