Features:
- Reverse-mount 3/8-24 UNF body: The 02-12 case format belongs to the imperial-thread NSv reverse-mount range.
- 0.5 m probe lead: The length option identifies the probe segment rather than a complete measurement system.
- Standard ClickLoc cable: Connector option 02 specifies a miniature coaxial ClickLoc connection on standard cable.
This 3/8-24 reverse-mount format is distinct from the M10×1 NSv reverse-mount configuration.
A complete NSv chain includes the probe, a matching extension cable and a Proximitor Sensor selected for the intended system length.
The final 05 is the OEM multiple-approvals ordering option; site suitability depends on the delivered marking and applicable certification documents.
Apter Power supports documentation review, quotation and sourcing for the Bently Nevada 330906-02-12-05-02-05 3300 NSv reverse-mount 3/8-24 proximity probe.
Bently Nevada 330906-02-12-05-02-05 3300 XL NSv Reverse-Mount Probe Manuals,Datasheets,Link
Important Notice: These links are site navigation, not a complete-code OEM datasheet. Confirm the reverse-mount configuration against manufacturer documentation.
- The complete catalog code is 330906-02-12-05-02-05; the 330906-02-12 base belongs to the reverse-mount 3/8-24 UNF series.
- The 05 total-length segment means 0.5 m, not 5 m; the OEM uses 50 for 5.0 m.
- 330907-05-30 is the separate M10×1 reverse-mount base; similar appearance does not erase the thread difference.
- Option 02 is the miniature coaxial ClickLoc connector with standard cable.
- Option 12 is the separate FluidLoc cable selection in the OEM reverse-mount chart.
- The final 05 means the multiple-approvals order option. Site acceptance requires the delivered marking and applicable certificate, not an inference from a catalog suffix alone.
- The 0.5 m lead on this reverse-mount probe is one length element of an NSv transducer system, not the complete cable run.
- Baker Hughes specifies that the probe and NSv extension-cable lengths together equal the selected Proximitor Sensor system length.
- The NSv Proximitor Sensor range includes separate 5 m and 7 m system-length selections with distinct mounting arrangements.
- In a complete 3300 XL NSv system, this reverse-mount probe family serves compressor and other rotating-machine locations with restricted counterbore, side-view or rear-view space.
- The NSv system is used for radial vibration and radial position monitoring on small shafts in fluid-film-bearing machinery.
- With the matching extension cable and Proximitor Sensor, NSv probes also support axial-position measurements on small flat targets.