Features:
- Armored M10 x 1 metric thread with 90 mm case provides mechanical protection and standard metric mounting for process compressor installations.
- Increased chemical resistance compared to 3300 RAM probes enables reliable operation in environments with oils, solvents, and aggressive media.
- Superior side-view characteristics deliver accurate readings when perfect perpendicular alignment isn't possible—common in tight compressor casings.
The 330910-00-09-10-01-00 is designed to slide into existing 3300 RAM installations without rework. Its M10 x 1 thread matches metric ports already in place, and its electrical characteristics align with legacy systems so that swapping the Proximitor sensor is the only change required to gain NSv performance. The 1.0 meter integral cable keeps wiring tidy, and the gold-plated ClickLoc connector locks with a finger turn—no tools needed.
The armor on the 330910-00-09-10-01-00 is not just for show. It protects the probe during the rough handling that comes with installation in tight compressor skids, where cables share conduit with power wiring and are subject to pulls and bends that would damage unprotected cables. The armor also guards against accidental impacts during maintenance, keeping the probe intact when tools slip or panels are moved.
Process compressors expose probes to a cocktail of lubricating oils, solvents, and aggressive media that can degrade standard materials. The 330910-00-09-10-01-00 uses the NSv platform's increased chemical resistance to stand up to these conditions, maintaining accuracy and structural integrity where other probes fail.
The 330910-00-09-10-01-00 Bently Nevada 3300 NSv Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330910-00-09-10-01-00 3300 NSv Proximity Probese Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330910-00-09-10-01-00 3300 NSv Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330910-00-09-10-01-00
- Condition New Original ready stock
- Product Family
330910-00-09-10-02-00,330910-00-09-10-12-00,330910-00-09-10-01-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Small, high-speed machinery: such as small centrifugal compressors, expanders, and integrally geared compressors.
- Narrow measurement area monitoring: When the target area width on the shaft is less than 9.5 mm (0.375 in), the 3300 NSv is the only option that can provide an accurate signal.
- Embedded mounting: Due to its small probe head, it is suitable for installation in extremely narrow spaces inside the bearing housing.
- Linear Range: The standard range is 1.5 mm (60 mils), starting approximately 0.25 mm (10 mils) from the probe.
- High Sensitivity (Scale Factor): The standard scale factor is 7.87 V/mm (200 mV/mil), enabling precise detection of extremely small axial vibrations.
- Low Cross-Interference: Compared to the standard probe, the NSv design significantly reduces sensitivity to lateral metal objects, greatly improving measurement efficiency and accuracy when installed in narrow housings.
- Radial Vibration Monitoring: Arranged X-Y (90 degrees) on the bearing housing to observe the shaft orbit of small rotors, diagnosing imbalance, misalignment, or fluid eddy currents.
- Thrust/Axial Position Monitoring: Monitors the axial movement of small turbine rotors to prevent rotor collisions caused by thrust bearing failure.
- Speed/Phase Monitoring: Utilizes small slots or protrusions on the shaft to generate pulse signals as a keyphasor reference, providing accurate speed data and vibration phase analysis.