Features:
- Link Between the Proximity Probe and Machinery Monitoring System
- Integrates High-Precision Signal Conditioning with Enhanced RFI/EMI Immunity
- Functions Alongside the 3300 XL NSv Probe and Extension Cable Assembly
The Bently Nevada 330980-51-00 3300 XL NSv Proximitor Sensor serves as the essential signal processing interface in a complete proximity transducer system, providing reliable conversion of eddy current signals into standardized vibration and position data for industrial machinery protection applications. The 330980-51-00 continuously receives incoming signals from the connected proximity probe and processes them into accurate measurement outputs suitable for monitoring rotating equipment health. Consistent signal integrity is standard with the 330980-51-00, and its enhanced electromagnetic immunity ensures stable performance even in electrically noisy industrial environments without requiring special mounting considerations.
The 330980-51-00 provides fundamental signal conditioning functions critical to the entire transducer system, and represents a vital element of the measurement path, directly influencing the proper, normal operation of the overall machinery monitoring system. One 330980-51-00 proximitor sensor is required per proximity probe channel based on the specific measurement configuration needs. The 330980-51-00 features a compact, thin design that occupies minimal installation space and can be mounted using either high-density DIN-rail configurations or traditional panel mount arrangements.
For extended reach applications, the 330980-51-00 supports a total system length of 5.0 meters (16.4 feet), delivering sufficient cable distance for flexible installation across various machinery monitoring setups. The 330980-51-00 incorporates SpringLoc terminal strips that require no special installation tools, facilitating faster and highly robust field wiring connections. Beyond standard single-channel operation, the 330980-51-00 configuration ensures dependable signal transmission throughout the entire measurement chain. The 330980-51-00 system executes signal processing through internal circuitry specifically designed for NSv proximity applications. Using this method, the transducer system continually evaluates the integrity of the probe signal and transmission path. If the system identifies that the probe signal is no longer delivering stable output outside configured measurement tolerances, it communicates the condition to the monitoring system for appropriate diagnostic response.
The 330980-51-00 Bently Nevada 3300 XL NSv Proximitor Sensor may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330980-51-00 3300 XL NSv Proximitor Sensor Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330980-51-00 3300 XL NSv Proximitor Sensor Specs
General
- Manufacturer Bently Nevada
- Model 330980-51-00
- Condition New Original ready stock
- Product Family 330980-51-05,330980-50-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration and Position: Measuring the dynamic movement and static position of shafts smaller than 51 mm (2 in).
- Axial (Thrust) Position: Monitoring the longitudinal movement of flat targets smaller than 15 mm (0.6 in).
- Specific Machinery: Widely used in centrifugal air compressors, refrigeration compressors, process gas compressors, small pumps, and fans.
- Physical Setup: It is typically mounted on a 35 mm DIN-rail (indicated by the -51 option) or via a traditional panel-mount.
- Monitor Configuration: You must configure your monitoring system (e.g., 3500 Series) to recognize the "NSv" transducer type to ensure the correct Scale Factor (7.87 V/mm or 200 mV/mil) is applied.
- Wiring: Uses SpringLoc terminal strips for fast, robust field wiring without special tools. It requires a -17.5 to -26 Vdc power supply.
- Calibration: Factory-calibrated to AISI 4140 steel targets by default. If using other materials, custom calibration must be specified or adjusted at the monitor level.
- System Upgrades: It is designed to replace older 3300 RAM or 3000/7000-series 190 systems. When upgrading from a 3300 RAM system, you can often keep the existing probe and cable.
- Maintenance: Performance is maintained through periodic verification and recalibra.