Features:
- Assembly: Armored, shielded three-conductor accelerometer interconnect cable.
- Ordered length: The -18 option specifies 18 ft.
- Terminations: Three-socket plug at one end; terminal lugs at the other.
Baker Hughes lists the 16710 family among its 330400 and 330425 accelerometer interconnect choices, not as an accelerometer itself.
Its plug and lug ends connect different points in the acceleration-measurement wiring path; the cable does not measure vibration independently.
For a replacement, verify the installed sensor interface, physical routing and terminal location along with the ordered length.
Apter Power can support exact-part quotation, documentation requests and selection review for the 16710-18 armored cable.
Bently Nevada 16710-18 Armored Accelerometer Interconnect Cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Armored option: 16710 is the protected construction listed beside unarmored 16925.
- Conductor gauge: 16710 uses three 22 AWG conductors; 130539 uses 18 AWG.
- Boot option: The 130539 description includes a boot; the 16710 listing does not.
- Sensor end: A three-socket plug is specified for the accelerometer-side connection.
- Field end: Terminal lugs, not a second plug, terminate the opposite end.
- Sensor family: The 330400 and 330425 order table includes 16710 among their interconnect cable choices.
- Ingress rating: The sensor IP68 statement expressly excludes the cable.
- Length range: 16710 is ordered in a 3–99 ft range; another route length requires a matching suffix.
- Compatibility limit: The cited order table does not establish blanket proximity-probe or 3500-monitor fit.
- 330400 connection: 16710 is a documented interconnect option for the 330400 casing accelerometer.
- 330425 connection: The same cable family is listed for the higher-range 330425 accelerometer.
- 330450 HTAS: Baker Hughes also lists 16710-AA as an armored interconnect option for this system.