Features:
- Provides 30ft (9.1m) reach with armored construction for mechanical protection.
- 22 AWG with braided shield (85% coverage) for noise immunity.
- Features connector at sensor end with terminal lugs for field wiring.
The 84661-30 is a 30-foot (9.1-meter) armored cable designed for accelerometers and 2-wire transducers in machinery condition monitoring applications. The armored construction provides mechanical protection against physical damage, making the 84661-30 suitable for installations where cables may be exposed to abrasion, crushing, or impact. The 84661-30's 30-foot length provides flexibility for connecting sensors to monitoring systems at convenient distances.
The 84661-30 features 3-conductor shielded construction with 22 AWG conductors, a braided shield (85% coverage minimum), and a PVC outer jacket. The 84661-30's shielding provides excellent noise immunity, ensuring reliable signal transmission from the sensor to the monitoring system. The 84661-30 includes a MIL-C-5015 connector at the sensor end and terminal lugs at the monitor end for easy field wiring.
The 84661-30 operates from -20°C to +100°C, making it suitable for a wide range of industrial applications. The 84661-30 has a minimum bend radius of 63.5 mm (2.5 in), ensuring flexibility for routing in control cabinets. The 84661-30 is designed for use with Bently Nevada accelerometers and velocity sensors, ensuring reliable signal transmission for critical machinery protection. The 84661-30 is a standard spare part for maintaining existing monitoring systems.
The 84661-30 Bently Nevada Standard Armored may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 84661-30 Standard Armored Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 84661-30 Standard Armored Specs
General
- Manufacturer GE / Bently Nevada
- Model 84661-30
- Condition New Original ready stock
- Product Family
84661-6,84661-8,84661-17,84661-33
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Oil & Gas Refineries & Piping: Routed across large centrifugal pumps and reciprocating compressor skids where the cable must resist pooling oils, hydrocarbon solvents, and heavy physical abrasion.
- Power Plants (Thermal, Gas, & Hydro): Transmits piezoceramic casing vibration data from steam and gas turbine bearings to control panels, enduring intense ambient temperatures.
- Chemical Processing Facilities: Used on process mixers, extruders, and fans where corrosive gases or frequent chemical washdowns would quickly degrade non-armored signal jackets.
- Heavy Mining & Cement Mills: Protects low-voltage telemetry lines on rock crushers, conveyor drives, and ball mills against crushing damage from falling rock debris or severe mechanical impacts.
- API 670 Compliance: Fully satisfies the American Petroleum Institute (API) 670 Standard for Machinery Protection Systems, guaranteeing specific grounding, continuous shielding, and signal reliability.
- Hazardous Area Intrinsically Safe (IS) Integration: Approved for deployment inside Class I, Division 1 & 2 (Groups A, B, C, D) and ATEX/IECEx Zone 0, 1, & 2 regions when piped through a matching galvanic barrier or zener diode system.
- Hazardous Area Intrinsically Safe (IS) Integration: Approved for deployment inside Class I, Division 1 & 2 (Groups A, B, C, D) and ATEX/IECEx Zone 0, 1, & 2 regions when piped through a matching galvanic barrier or zener diode system.
- Extended Sensor Matches: Interoperable with various specialized Bently velocity sensors utilizing the same 2-pin top connector layout, such as the 330525 High-Temperature Velomitor or 330530 Radiation-Resistant Velomitor.
- Strict Restriction: Not for use with the 21128 Velocity Transducer Housing due to specific inner-diameter physical routing constraints.
- Legacy & Distributed Systems: Interoperable with vintage 3300 racks or distributed sensor networks like the Bently Nevada Orbit 60 or Trendmaster Pro dynamic data blocks.