Features:
- Simplex chassis base configuration supporting 1 CPU card, up to 2 input modules, and 1 output relay module.
- Operates from a wide external +24 V DC supply range of 18 V DC to 36 V DC with dual redundant input terminals.
- Includes a single-point earth grounding switch to isolate instrument system common from physical chassis earth.
This unit is supplied as the Bently Nevada 3701/44 175794-01 Simplex Terminal Base hardware platform, designed for field-mounting on high-value machinery skids.
It functions as the core structural and electrical wiring foundation for the ADAPT 3701/44 Aeroderivative Machinery Dynamics Monitor system.
Mount vertically on a flat bulkhead or wall panel via four corner bolts to ensure proper natural convection cooling across installed modules.
The Bently Nevada 3701/44 175794-01 Simplex Terminal Base is fully certified and tested by the manufacturer (OEM).
Bently Nevada 3701/44 175794-01 Terminal Base Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Aeroderivative gas turbine machinery protection and condition monitoring.
- Critical industrial centrifugal and axial compressor protection systems.
- High-speed industrial gearbox vibration and dynamics surveillance.
- Requires Bently Nevada Monitor Configuration (BNMC) software running on Windows for initial system setup.
- Equipped with two pluggable terminal blocks featuring channel-specific labels for easy field wiring removal.
- Compatible with 3701 Processor Card, PAA/PAV/PoV Input Modules, and Output Relay Modules.
- Features dual pluggable wiring termination blocks with channel-specific labels for rapid field maintenance.
- Requires vertical mounting on a flat bulkhead or wall panel via four corner bolts to optimize natural convection cooling.
- Includes a single-point earth grounding switch to isolate instrument system common from physical chassis earth.
- Certified for Class 1 Division 2 Groups A, B, C, D (T4) hazardous area field installations.
- Complies with ATEX and IECEx Zone 2 standards under protection rating Ex nA nC IIC T4 Gc.
- Built and tested in compliance with IEC 60068-2-6 for 5g vibration resistance and 15g shock resistance.