Features:
- Integrated PROXPAC XL probe, extension cable and Proximitor Sensor assembly
- 1.5-inch standoff with 10.6-inch probe penetration
- IP66 and Type 4X glass- and conductive-fiber-reinforced PPS housing
The Bently Nevada 330880-28-15-106-00-02 is a configured PROXPAC XL proximity transducer assembly. Option 28 selects a 3300 XL 8 mm probe with Multiple Approvals. Option 15 selects a 1.5-inch standoff adapter. Option 106 specifies 10.6 inches of probe penetration.
The 330880-28-15-106-00-02 uses option 00 for two plugs and two washers without fittings. Option 02 specifies a 3/4-14 NPT mounting thread. The 8 mm probe has a 1.0 m 75-ohm FEP-insulated triaxial cable. A miniature coaxial ClickLoc connector joins the probe cable inside the assembly.
The 330880-28-15-106-00-02 places the Proximitor Sensor and cable connections in a glass- and conductive-fiber-reinforced polyphenylene sulfide (PPS) housing. The housing is rated IP66 and Type 4X. The probe operating range is -52 to +177 degrees C, while the housing and Proximitor Sensor range is -52 to +100 degrees C. Verify penetration, target clearance and mounting-thread compatibility before installation.
Bently Nevada 330880-28-15-106-00-02 PROXPAC XL Proximity Transducer Assembly is covered by the current official PROXPAC XL datasheet. Apter Power supports quotation, official-document access and installation-configuration checks; availability is confirmed at inquiry.
Bently Nevada 330880-28-15-106-00-02 PROXPAC XL Proximity Transducer Assembly Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330880-28-15-106-00-02 PROXPAC XL Proximity Transducer Assembly Specs
General
- Manufacturer Bently Nevada
- Model 330880-28-15-106-00-02
- Condition New Original ready stock
- Product Family PROXPAC XL Proximity Transducer Assembly
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Order Configuration:
- 28 - 3300 XL 8 mm probe with Multiple Approvals
- 15 - 1.5 in (38 mm) standoff adapter
- 106 - 10.6 in probe penetration
- 00 - Two plugs and two washers; no fittings
- 02 - 3/4-14 NPT mounting thread
Protection:
- IP66 ingress protection
- Type 4X housing rating
- Glass- and conductive-fiber-reinforced PPS enclosure
Installation:
- Confirm 3/4-14 NPT mounting compatibility
- Verify the 10.6-inch penetration against the machine geometry
- Set probe gap and target conditions with the official manual