Features:
- Coordinates documented local, remote and Q-line I/O arrangements for the Ovation OCR400 architecture.
- Supports up to 128 local points or 512 remote points within the published system combination limits.
- Uses the position code to distinguish local, remote and Q-line interface assignments.
The current ordering configuration is 5X00226G02, the G02 Ovation OCR400 I/O Interface module for local, remote and Q-line branches.
It connects supported OCR400 I/O branches to Ovation within the published local, remote and Q-line point limits.
Before installation, confirm the required L1/L2, R3/R4 or Q5 position code, branch type, point capacity and matching OCR400 field hardware.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson 5X00226G02:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Interfaces local OCR400 I/O points installed close to the controller cabinet.
- Coordinates remote OCR400 I/O branches distributed through the plant architecture.
- Supports Q-line I/O arrangements within the published local and remote point limits.
- The G02 interface belongs to the Ovation OCR400 I/O architecture and must retain its documented branch assignment.
- Local L1/L2, remote R3/R4 and Q5 positions identify different supported I/O connection arrangements.
- Replacement planning must account for the installed base, personality modules and project database configuration.
- The interface coordinates controller access to the attached OCR400 I/O points.
- Published capacity supports up to 128 local points or 512 remote points subject to combination limits.
- Q-line arrangements support up to 96 local or 384 remote points within the documented architecture.
- Install the module only in the position assigned to the required local, remote or Q-line interface role.
- Confirm branch wiring, base hardware and cabinet power isolation before removing the installed interface.
- After replacement, verify I/O communication and point status against the active Ovation project.