Features:
- Ultra-Compact Book-Type Design (60mm Width)
- Native Dual-Fieldbus Communication (Modbus + CANopen)
- Embedded Safe Torque Off (STO) – SIL2/PL d
The Schneider Electric ATV32HU30N4 features a 60mm wide heatsink design allowing zero-touch side-by-side mounting. This saves up to 40% of panel space compared to traditional square drives, specifically engineered for complex machinery where electrical cabinet real estate is a premium.
Unlike competitors that lock fieldbus behind expensive option cards, the Schneider Electric ATV32HU30N4 integrates both Modbus and CANopen physically on the front RJ45 port. This allows direct connection to PLC architectures without adapters, reducing installation time and bill of materials for machine builders using CANopen servo interfaces.
The Schneider Electric ATV32HU30N4 eliminates the need for external safety contactors for emergency stop circuits (Category 0). The integrated STO function prevents unexpected motor startup, complying with IEC 61800-5-2. This reduces panel complexity while meeting high-risk machinery safety standards.
The ATV32HU30N4 Schneider Electric 3kW 380-500V Altivar 32 Variable Speed Drive may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Schneider Electric ATV32HU30N4 3kW 380-500V Altivar 32 Variable Speed Drive Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric ATV32HU30N4 3kW 380-500V Altivar 32 Variable Speed Drive
General
- Manufacturer Schneider Electric
- Model ATV32HU30N4
- Condition New Original ready stock
- Product Family ATV320U22N4C,ATV32HD15N4,ATV32HU15N4
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Complex Packaging Machinery: The Schneider Electric ATV32HU30N4 excels in intermittent motion control for vertical form-fill-seal (VFFS) machines, leveraging its 10.7A transient current capability to handle high-inertia film unwind rolls.
- Material Handling Conveyors: With integrated CANopen, this 3kW drive synchronizes perfectly with logic controllers in sorting and palletizing lines, providing precise torque control at near-zero speed for accumulation conveyors.
- Textile & Spinning Machines: The sensorless flux vector control maintains constant tension even when line voltage fluctuates between 380-500V, preventing yarn breakage during high-speed winding (up to 599Hz output).
- Woodworking Machinery (Router Spindles): The built-in Class C2 EMC filter ensures compliance with CE emissions standards, crucial for CNC routers where high-frequency noise from the spindle cannot interfere with adjacent positioning encoders.
- Temperature & Altitude Limits: Full rated performance up to 50°C without forced ventilation; above this up to 60°C with linear current derating (2.2% per °C). Operational up to 3000m altitude (1% derating per 100m above 1000m). Storage tolerance from -25°C to 70°C.
- Pollution & Protection: Rated IP20 (finger-safe but not dust/water-tight). Requires installation inside a NEMA 12 or IP54 minimum enclosure. Pollution Degree 2 (non-conductive pollution only). Condensation is prohibited; ensure cabinet heater maintains relative humidity between 5-95% non-condensing.
- Vibration & Shock: Withstands 1.5mm peak-to-peak from 3-13Hz and 1gn from 13-200Hz (IEC 60068-2-6). Shock resistance: 15gn for 11ms. Not suitable for direct engine mounting without vibration dampers.
- Derating for Switching Frequency: Above the nominal 4kHz PWM, the drive automatically reduces output current capacity. For continuous operation at 8kHz, derate to 90% of rated current (approx 6.4A). At 16kHz, derate to 70% (approx 5A).
- Motor Compatibility: Universal operation for both legacy asynchronous (IM) and modern permanent magnet synchronous motors (PMSM). Supports auto-tuning for both technologies, optimizing energy efficiency by up to 30% in constant torque applications.
- PLC & Fieldbus Connectivity: Native Modbus RTU (RS485, 2-wire) for basic SCADA monitoring. Native CANopen (DS301/DS402) for multi-drive synchronization. Optional Profibus DP V1 (VW3A3607) for Siemens S7 integration or DeviceNet for Rockwell legacy systems.
- Braking & EMC Integration: Direct compatibility with VW3A7606R07 braking resistor (54-72 ohm). For upstream protection, the drive frame physically accepts a GV2L16 circuit breaker via an adapter, eliminating external wiring. Requires external line choke (option VW3A4565) if network impedance is less than 5kA.
- Software Tools: Fully compatible with SoMove (Schneider’s PC configuration software) via USB converter VW3A8122. Full parameter upload/download, oscilloscope function for monitoring torque/speed, and offline configuration creation for cloning multiple ATV32HU30N4 units.