Features:
- Delivers 45kW (60HP) normal duty output with 86A continuous current, 95A transient for 60 seconds, suitable for pumps, fans, and compressors in utility applications.
- IP21 enclosure allows direct mounting without external cabinets in clean indoor environments.
- Features 3 analog inputs (12-bit), 8 discrete inputs (2 pulse to 30kHz), 2 analog outputs (10-bit), 3 relay outputs, and 16 preset speeds.
he ATV630D45N4 is engineered for demanding process applications such as pumping stations, HVAC systems, and industrial compressors. Under normal duty (constant torque) conditions, it delivers 45kW (60HP) with 86A continuous output current at 2.5 kHz switching frequency. For heavy duty applications requiring high overload capability, the drive provides 37kW (50HP) with approximately 70A continuous and transient capability of 1.5x rated current for 60 seconds.
The ATV630D45N4 is rated IP21 per IEC 60529, providing protection against solid objects larger than 12mm (fingers and tools) and vertically dripping water. This enclosure rating allows the drive to be mounted directly on a wall or machine frame without an additional protective cabinet in clean, dry indoor environments. Unlike IP00 drives that require panel mounting with minimum clearances, the ATV630D45N4 simplifies installation and reduces overall system footprint. The integrated C3 EMC filter meets EN/IEC 61800-3 category C3 standards for 150m cable runs, eliminating the need for external EMC filters in most installations.
The ATV630D45N4 provides extensive I/O for seamless integration into control systems. Three analog inputs are software-configurable for voltage (0-10V DC, 30 kΩ, 12-bit) or current (0-20mA, 250Ω, 12-bit). Eight discrete inputs operate at 24V DC, with DI5 and DI6 configurable as high-speed pulse inputs up to 30 kHz for encoder feedback. The drive includes two analog outputs (0-10V or 0-20mA, 10-bit) and three relay outputs (R1: NO/NC fault relay, R2/R3: NO sequence relays, each rated 3A at 250V AC resistive, 2A inductive).
The ATV630D45N4 SCHNEIDER Variable Speed Drive may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
SCHNEIDER ATV630D45N4 Variable Speed Drive Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
SCHNEIDER ATV630D45N4 Variable Speed Drive Specs
General
- Manufacturer SCHNEIDER
- Model ATV630D45N4
- Condition New Original ready stock
- Product Family
ATV610D90N4,ATV610D15N4,ATV610D45N4
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Water & Wastewater Management: High-volume municipal distribution pumps, lifting stations, sludge pumps, desalinization high-pressure pumps, and deep-well submersible pumps.
- Oil & Gas Process Control: Pipeline transmission pumps, water injection pumps, artificial lift systems (Progressive Cavity Pumps), and cooling tower fans.
- Food, Beverage & Chemical Lines: Clean-in-Place (CIP) feed pumps, industrial agitators, mixers, and high-capacity processing fans.
- Eco-Struxure Embedded Energy Management: The drive features a built-in energy dashboard. It tracks and logs actual energy consumption (kWh) with an accuracy deviation of less than 5% and automatically calculates real-time financial savings based on your local utility tariff.
- Advanced Motor Control & Eco Mode: Supports standard induction motors, permanent magnet synchronous motors (PMSM), and synchronous reluctance motors (SynRM). Its specialized "Energy Saving Mode" dynamically optimizes the motor voltage/frequency ratio under partial load conditions, reducing motor losses by up to an additional 5% to 10%.
- High Operating Efficiency: The drive itself boasts an operational efficiency rating exceeding 98% at full rated load, minimizing thermal dissipation inside the electrical panel.
- The Challenge: Managing a variable demand grid (e.g., city water supply) where multiple pumps need to run in parallel to maintain pressure without wasting energy or wearing out a single pump.
- The ATV630 Solution: Using its embedded multi-pump controller, several ATV630 drives can communicate directly via an Ethernet network. The system automatically shifts lead/lag positions among pumps based on actual running hours (wear equalization), wakes up staging pumps when demand spikes, and shuts them down smoothly when demand drops.
- The Challenge: Submersible sewage pumps or industrial slurry lines frequently suffer from impeller clogging due to rags and debris, leading to motor overload or destructive pump cavitation.