Features:
- Native Dual-Protocol Industrial Ethernet
- Extreme Environment Derating Validation
- Advanced I/O Flexibility with Sink/Source Switch
The Schneider Electric ATV930C31N4C eliminates communication gateways with embedded EtherNet/IP and Modbus TCP. Description: This drive integrates directly into your plant's DCS or PLC architecture. The dual-port switch allows for daisy-chain or ring topologies, reducing installation costs and improving network resilience. Real-time drive parameters, diagnostics, and energy data are accessible via standard web browsers using the built-in Web server.
Guaranteed performance in high-temperature settings, verified by official switching frequency curves up to 60°C. Description: Unlike standard drives that fail above 40°C, the Schneider Electric ATV930C31N4C provides transparent derating curves (Page 14). At 50°C, you can maintain 100% current at 4kHz switching frequency, or 50% at 8kHz. This engineering transparency allows for precise cabinet thermal management and prevents unexpected shutdowns in hot, un-airconditioned plants.
Effortless integration with any PLC technology via a hardware Sink/Source switch. Description: The control terminals feature a physical switch (Page 12) to adapt the logic inputs from Source (PNP transistor, factory default) to Sink (NPN transistor). This eliminates the need for intermediate relays or level shifters, speeding up installation by up to 20% during legacy system retrofits. The documentation also provides five distinct wiring diagrams for internal/external power supplies.
The ATV930C31N4C Schneider Electric Variable Speed Drive may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Schneider Electric ATV930C31N4C Variable Speed Drive Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric ATV930C31N4C Variable Speed Drive
General
- Manufacturer Schneider Electric
- Model ATV930C31N4C
- Condition New Original ready stock
- Product Family ATV32HU15N4,ATV32HU30N4,ATV71HD55N4Z
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Heavy Material Handling: Ideal for high-inertia loads like belt conveyors, bucket elevators, and stacker-reclaimers in mining. The Schneider Electric ATV930C31N4C provides up to 180% torque for breakaway starts.
- Oil & Gas Pumping (Centrifugal/Progressive Cavity): The embedded PID regulator optimizes flow and pressure, while "Stop & Go" sleep mode reduces energy consumption by up to 40% during low-demand periods.
- Metal & Steel Processing: Suited for high overload cycles on rolling mills, wire drawing machines, and crane hoists. The drive's robust short-circuit rating withstands harsh line harmonics.
- Water/Wastewater Treatment: The native EtherNet/IP allows direct integration into SCADA systems for remote pump control, filter backwash sequencing, and leakage detection without an external PLC.
- High-Temperature Operation: Validated for use up to 60°C (140°F) with predictable derating. The chart (Page 14) allows engineers to size the drive precisely for un-conditioned sheds or desert installations.
- Altitude Capability: Operates at full rating up to 1000m (3300 ft). Above 1000m, derate the output current by 1% per additional 100m, up to a maximum of 3000m (air insulation limitation).
- Vibration & Shock: Designed to IEC/EN 61800-5-1 for industrial environments, withstanding 1.5 mm peak-to-peak (2-13 Hz) and 1 gn (13-200 Hz).
- Corrosive Atmosphere: The standard coating is suitable for Class 3C2 environments (mild pollutants). For severe chemical or salt-spray environments, order the "S" variant (e.g., ATV930C31N4S) with enhanced conformal coating.
- Functional Safety (STO): The integrated Safe Torque Off (SIL3 / PL e) meets IEC 61508 and prevents unexpected start-ups, allowing you to eliminate external contactors for safety in Category 3 systems.
- Network Security: Complies with IEC 62443-2-4 (Industrial network security). The embedded web server has a password-protected access and disable function.
- Global Certifications: Holds CE (Europe), UL 61800-5-1 (US/Canada), RCM (Australia), and EAC (Eurasia). Essential for machine builders shipping globally.
- Energy Efficiency (IE2): As per IEC 61800-9, the Schneider Electric ATV930C31N4C is classified as an IE2 drive, ensuring minimal energy losses (less than 3% at nominal load), reducing cooling costs.