Features:
- The PN072139P904 marking appears on a PCB whose connector layout corresponds to the documented VX5A1300 soft-charge board arrangement.
- Schneider service documentation places the VX5A1300 soft-charge board in selected Altivar 61 and Altivar 71 drive configurations.
- The board uses frame-specific connections to the drive power board and three silicon-controlled rectifier modules.
The current ordering identifier is Schneider Electric
PN072139P904, an internal PCB marking associated with the documented Altivar soft-charge board arrangement.
The assembly performs the drive soft-charge function and connects to the power board and three SCR modules through the connector positions shown in Schneider service instructions.
Before replacement, verify the complete Altivar drive catalog number, serial number, frame size, service reference and connector layout; do not treat the internal PCB marking as a universal spare reference.
Availability is subject to Apter Power inventory and verification of the complete host-drive configuration.
Schneider Electric PN072139P904 manuals and reference links:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric PN072139P904 General Specifications
General
- ManufacturerSchneider Electric
- ModelPN072139P904
- ConditionNew original ready stock
- Product FamilyAltivar 61/71 Drive Spare Parts
- Supports qualified servicing of the VX5A1300 soft-charge board arrangement within documented Altivar 61/71 drive configurations.
- Provides a board-level replacement option when the original drive catalog number, frame size and connector positions all match.
- Helps maintain installed Altivar drives without treating the internal PN marking as a universal cross-drive spare reference.
- Compatibility must be checked against the complete Altivar 61 or Altivar 71 drive catalog number and its documented frame size.
- The documented arrangement uses CN2A, CNL1G, CNL2G, CNL3G and CN7A for frame-specific power-board and SCR connections.
- Schneider does not identify PN072139P902 or PN072139P903 as direct substitutes for PN072139P904, so interchangeability must not be assumed.
- The assembly performs the drive soft-charge function and remains separate from the main control, gate-driver and power boards listed by Schneider.
- Five documented connector groups integrate the soft-charge PCB with the power board and three SCR modules in the applicable arrangement.
- Correct operation depends on retaining the original wiring locations and matching the installed frame-specific service configuration.