Features:
- A dual-band IEEE 802.11n radio links cabinet equipment to an industrial wireless network.
- Two Fast Ethernet ports connect wired devices to the radio bridge.
- Redundant 24 V DC and PoE provide separate documented supply paths.
Siemens 6GK5734-1FX00-0AA0 bridges local Ethernet traffic into the selected 2.4 GHz or 5 GHz radio channel.
The two R-SMA sockets of 6GK5734-1FX00-0AA0 feed the antenna paths used for 2x2 MIMO communication.
Management and PROFINET diagnostics on 6GK5734-1FX00-0AA0 expose link, radio, and device status during commissioning.
The Siemens 6GK5734-1FX00-0AA0 SCALANCE W734-1 RJ45 IWLAN Client may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5734-1FX00-0AA0 SCALANCE W734-1 RJ45 IWLAN Client Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Wireless Link and Antenna Paths
- Radio bands: The installed radio operates in the approved 2.4 GHz and 5 GHz channels.
- MIMO paths: Two R-SMA sockets provide the external antenna connections for 2x2 operation.
- Data rate: IEEE 802.11n permits a gross wireless rate up to 300 Mbit/s.
- Country approval: The configured channel plan must follow the radio approval for the installation country.
Wired Device Connection
- Port group: Two RJ45 ports connect local 10/100 Mbit/s Ethernet devices.
- Bridge role: Wired frames cross the client radio toward the associated access point.
- PoE path: The documented Ethernet power input can supply the device without using the terminal feed.
- Diagnostics: PROFINET and Ethernet status separate a wired link fault from a radio association fault.
Wireless Configuration and Protection
- Authentication: WPA2 and IEEE 802.11i protect the configured wireless association.
- Management paths: Web, CLI, and SNMP provide separate configuration and monitoring access.
- Feature plug: A KEY-PLUG can enable supported iFeatures while the C-PLUG position retains configuration data.
- Replacement check: SSID, security credentials, country setting, and antenna assignment must match the saved installation.
Cabinet Supply and Environment
- Terminal feed: Two 24 V DC inputs support redundant supply wiring.
- Power draw: Typical consumption is 0.25 A at 24 V DC with approximately 6 W loss.
- Operating range: The documented ambient range is -20 to +60 °C.
- Enclosure limit: IP30 requires cabinet protection, and Zone 2 use requires the specified outer enclosure.