Features:
- Twenty fixed RJ45 ports and four combo positions organize copper and SFP connections within one 24-port switch.
- EtherNet/IP is the default profile, while PROFINET IO device operation remains available for automation integration.
- Redundant 24 V DC input and a signaling contact separate power continuity from alarm reporting.
Traffic enters Siemens 6GK5224-4GS00-2TC2 through fixed copper or medium-selectable combo positions before the store-and-forward engine directs frames to the required egress path.
Management access is separated from production traffic through the console connection, browser interface, command-line tools, and supported engineering access.
The removable C-PLUG provides a dedicated location for device configuration, while LEDs and the signaling contact expose local status for commissioning checks.
The Siemens 6GK5224-4GS00-2TC2 SCALANCE XC224-4C G Managed Switch may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5224-4GS00-2TC2 SCALANCE XC224-4C G Managed Switch Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
How Each Connection Serves the Switch
- Fixed Copper Links: Twenty RJ45 positions connect permanent 10/100/1000 Mbit/s copper segments.
- Combo Selection: Each of four combo positions accepts either its RJ45 path or a 1000 Mbit/s SFP path, not both at once.
- Service Access: The RJ11 console connection provides a local management route independent of an Ethernet browser session.
- Alarm Output: The two-pole signaling contact carries device status to an external monitoring circuit.
Path Recovery and Ring Behavior
- MRP Rings: Media Redundancy Protocol coordinates recovery within a PROFINET ring.
- Ring Coupling: MRP Interconnection links supported ring structures without collapsing them into one loop.
- Tree Control: STP, RSTP, RSTP+, and MSTP manage loop-free forwarding where spanning-tree operation is selected.
- Parallel Paths: PRP and link aggregation provide documented options for duplicated or bundled Ethernet paths.
Configuration Paths and Stored Parameters
- Initial Profile: The 2TC2 ordering variant starts with EtherNet/IP as its default device behavior.
- Browser Session: Web Based Management exposes switch parameters through HTTP or HTTPS.
- Engineering Access: CLI and STEP 7 provide additional documented routes for commissioning and diagnostics.
- Transferable Record: A supported C-PLUG stores the device configuration separately from the switch hardware.
How Forwarding Is Segmented and Timed
- VLAN Separation: Port-based VLANs divide connected stations into controlled Layer 2 broadcast domains.
- Multicast Handling: IGMP and GMRP manage group traffic so multicast forwarding follows registered receivers.
- Link Bundling: LACP combines supported physical links into one negotiated logical connection.
- Clock Alignment: NTP, SNTP, and IEEE 1588v2 PTP align switch time with the chosen network clock source.