Features:
- Uses SMD technology for low-inductance design, enabling high pulse frequencies up to the kHz range.
- Features onboard status LEDs (usually red or green) to distinguish between undervoltage, overcurrent, or overtemperature errors.
- The board includes integrated ferrites for common-mode suppression, which is critical for stable PROFIBUS/Encoder feedback.
The C98043-A7005-L1 / 6RY17041-0AA00 utilizes advanced SMD (Surface Mounted Device) components specifically designed to minimize parasitic inductance. In a drive system, this allows the insulated gate bipolar transistors (IGBTs) to switch at frequencies of 4 kHz, 8 kHz, or higher without generating excessive heat.
This board typically features a hardware watchdog that immediately shuts down the firing pulses within microseconds in the event of a gate driver fault or DC link overvoltage. Unlike purely software-monitored systems, this hardware-level safety feature prevents catastrophic shoot-through failure of the power inverter.
In a typical industrial drive cabinet, high-energy switching noise easily couples into sensitive analog signals (0-10V) or feedback lines (Encoder). The C98043-A7005-L1 / 6RY17041-0AA00 incorporates an extensive ground plane and common-mode chokes directly on the board. This passive filtering ensures that the 24V encoder signals remain stable even when large motors are braking.
The C98043-A7005-L1 6RY17041-0AA00 Siemens Control Board may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL)by the manufacturer (OEM).
Siemens C98043-A7005-L1 6RY17041-0AA00 Control Board Manuals, Datasheets,Drivers,Link
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not included with this equipment unless listed in the above stock item description.All prices are shown in USD.
Siemens C98043-A7005-L1 6RY17041-0AA00 Control Board Specs
General
- Manufacturer Siemens
- Model C98043-A7005-L1 6RY17041-0AA00
- Condition New Original ready stock
- Product Family
6RY17041-0AA01,C98043-A7004-L1,C98043-A7002-L1
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
- SIMOREG DC Master Drives: Integrated into 6RA70 and 6RA24 series digital converters used to control high-power DC motors.
- Heavy Industrial Automation: Widely applied in sectors requiring high torque and precise speed control, such as steel mills, paper machines, elevators, and printing presses.
- Parameterization & Diagnostics: Provides local access for engineers to set motor parameters, view fault codes (r060, r065), and monitor real-time operational status.
- Local Interface: Features a 5-digit LED display and tactile buttons for local data entry and visual feedback.
- System Connection: Plugs directly into the drive’s internal bus/backplane, typically communicating with the main control module (CUD1/CUD2).
- Configuration Support: Acts as the physical port for initial drive commissioning and software version verification (e.g., verifying if the drive supports software versions 1.xx, 2.xx, or 3.xx).
- Safety Integrated: Designed to work within the Siemens "Safety Integrated" framework, allowing the drive to execute safety functions like safe stops or speed limits when properly configured.
- Industrial Protection: The panel is built to withstand harsh electrical environments, complying with EMC (Electromagnetic Compatibility) standards for heavy industrial usage.
- Regulatory Approvals:CE & UL: Adheres to European and North American safety regulations for low-voltage industrial equipment.