Features:
- The IGD8 module identity belongs to specified high-voltage SIMOVERT inverter equipment.
- The AC host-device range covers 500–690 V three-phase equipment at 50 or 60 Hz.
- The DC host-device range covers 675–930 V equipment in the stated 570 A and 1080 A classes.
Siemens 6SE7035-7GK84-1JC2 must be identified by the complete article number and the IGD8 designation.
The AC values associated with 6SE7035-7GK84-1JC2 classify the host converter rather than a low-voltage logic input.
The DC voltage and current classes of 6SE7035-7GK84-1JC2 define the equipment group in which this spare module belongs.
The Siemens 6SE7035-7GK84-1JC2 SIMOVERT IGD8 Inverter Control Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SE7035-7GK84-1JC2 SIMOVERT IGD8 Inverter Control Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Three-Phase Host Equipment
- Voltage class: The module reference is assigned to 500–690 V three-phase AC devices.
- Line frequency: The associated AC equipment operates at 50 or 60 Hz.
- Value meaning: These ratings identify the host drive class, not a direct supply terminal on the loose module.
DC Host Equipment Boundary
- Voltage class: The stated DC equipment range extends from 675 to 930 V DC.
- Equipment scope: The range describes the converter device in which the IGD8 module is installed.
- Identification rule: The complete 6SE7035-7GK84-1JC2 suffix must remain matched to the host assembly.
Supported Host Ratings
- Lower class: The first specified host-device current rating is 570 A.
- Higher class: The second specified host-device current rating is 1080 A.
- Interpretation: Both values classify supported equipment and do not describe a control-signal current.
Identity Checks Before Exchange
- Designation: The installed board must be identified as an IGD8 inverter control module.
- Article number: The full 6SE7035-7GK84-1JC2 string distinguishes the required spare reference.
- Host nameplate: AC or DC voltage class and the 570 A or 1080 A rating must agree with the converter nameplate.