Features:
- 6AG1516-3FN02-2AB0 combines fail-safe S7-1500 processing with a conformally coated SIPLUS hardware platform.
- Independent PROFINET IRT, PROFINET RT, and PROFIBUS paths separate real-time, secondary Ethernet, and fieldbus traffic.
- Extended temperature, altitude, humidity, chemical, and dust limits define the approved installation envelope.
Siemens 6AG1516-3FN02-2AB0 executes standard and safety-related logic while coordinating local and distributed I/O.
The two PROFINET functions and PROFIBUS interface let 6AG1516-3FN02-2AB0 divide deterministic device traffic from additional network communication.
Conformal coating and protected unused connectors allow 6AG1516-3FN02-2AB0 to retain its specified environmental resistance when installed within the stated limits.
The Siemens 6AG1516-3FN02-2AB0 SIPLUS S7-1500 CPU 1516F-3 PN/DP may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AG1516-3FN02-2AB0 SIPLUS S7-1500 CPU 1516F-3 PN/DP Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
What the SIPLUS Construction Changes
- Coated electronics: Conformal treatment raises resistance to the documented environmental exposure classes
- Open interfaces: Unused connectors must retain their supplied covers so exposed contact areas do not defeat the protection concept
- Wet condition: Humidity tolerance does not authorize startup while condensation is present
- Substance classes: The published environmental groups cover specified coolant, lubricant, chemical, salt-spray, sand, and dust exposure
Orientation, Temperature, and Altitude Work Together
- Horizontal position: The preferred orientation permits the higher documented upper operating temperature
- Vertical position: Reduced convection lowers the allowable upper temperature
- Elevation: Above 2000 m, temperature and air-pressure limits must be applied before using the 5000 m ceiling
- Commissioning gate: Dry hardware and the specified environmental range must both be satisfied before power-up
One Switched IRT Path, One RT Path, and PROFIBUS
- Deterministic segment: The two-port IRT interface carries synchronized controller and I/O traffic
- Independent Ethernet: The RT interface uses its own IP address and does not share the IRT switch
- DP connection: The PROFIBUS port integrates supported legacy and distributed devices
- Safety telegrams: PROFIsafe exchange follows the approved network and device configuration
- Cycle alignment: Supported isochronous functions coordinate bus updates with the configured control cycle
Standard Logic and Fail-safe Logic on the Same CPU
- Common hardware: Ordinary automation and safety program sections execute within one controller platform
- Approved level: The documented configuration reaches SIL 3 and Performance Level e
- Engineering match: Hardware revision, firmware, safety option package, and device assignments must agree with the project
- Load medium: The SIMATIC Memory Card holds the loadable project and is mandatory for CPU operation