Features:
- The module's module designation is EM 223.
- The digital inputs are 16.
- Input voltage is set to 24 VDC.
6ES7223-1BL22-0XA0 combines module designation of EM 223, digital inputs of 16, and input voltage of 24 VDC in the SIMATIC S7-200 platform.
It adds sixteen 24 VDC inputs and sixteen 24 VDC sourcing transistor outputs to an S7-200 station. This role connects the SIMATIC S7-200 EM 223 Digital I/O Module to the surrounding SIMATIC S7-200 architecture.
Before commissioning, preserve the input and output address allocation; do not mirror sink/source input wiring onto the sourcing output side; and verify channel grouping and load current before energizing.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Siemens 6ES7223-1BL22-0XA0:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Consolidates discrete sensing and actuation in one S7-200 expansion position.
- Connects 24 VDC field switches to the input side and sourcing DC loads to the output side.
- Maintains legacy machines where the exact EM 223 address and terminal layout must remain unchanged.
- For input logic, the selected value is sink or source.
- This configuration uses selectable by S7-200 configuration for input delay.
- The applicable value for output grouping is four groups of four outputs.
- The field side is electrically isolated from module logic.
- Operation uses per-channel LEDs as the status indication setting.
- Do not mirror sink/source input wiring onto the sourcing output side.
- System integration relies on 137.5 mm for width.
- Technicians should preserve the input and output address allocation.
- Commissioning teams need to verify channel grouping and load current before energizing.