Features:
- Combines CNC, PLC and HMI functions in one SINUMERIK 828D Basic control unit.
- Uses a 10.4-inch TFT color display with 800×600-pixel resolution and an integrated CNC keyboard.
- Connects the SINUMERIK control arrangement to DRIVE-CLiQ, I/O modules and machine-control components.
Siemens 6FC5370-3AA30-0AA1 is the PPU 241.3 horizontal CNC hardware that gives the SINUMERIK 828D Basic system one operator-facing unit for CNC, PLC and HMI coordination.
Power planning for 6FC5370-3AA30-0AA1 starts with a 24 V DC input range of -15% to +20%; it draws up to 60 W and its internal buffer spans 3 ms. A SITOP smart power supply provides 20 ms buffering for this configuration.
For storage and transport, 6FC5370-3AA30-0AA1 uses -25 to +55 °C and -20 to +60 °C ranges respectively, with humidity limits of 10–100% RH for storage and 5–95% RH for transport.
The Siemens 6FC5370-3AA30-0AA1 SINUMERIK 828D Basic PPU 241.3 horizontal CNC hardware may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6FC5370-3AA30-0AA1 SINUMERIK 828D Basic PPU 241.3 horizontal CNC hardware Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
CNC, PLC, and HMI Coordination
- Control unit: 6FC5370-3AA30-0AA1 combines CNC, PLC and HMI functions in one SINUMERIK 828D Basic PPU.
- Operator role: The PPU presents the CNC operator interface through its integrated display and keyboard.
- Drive exchange: The configured DRIVE-CLiQ path carries control and drive data between the PPU arrangement and SINAMICS S120 Combi.
- Mounting orientation: The horizontal operator-panel design is paired with the vertical mounting position.
Operator Access Paths
- Display: The 10.4-inch TFT color display presents the 800×600-pixel operator view.
- Keyboard: The integrated QWERTY CNC keyboard provides the local command-entry surface.
- USB connection: The front USB interface provides the listed peripheral connection path.
- Ethernet connection: The front Ethernet interface provides the listed network connection path.
Drive and I/O Connection Roles
- DRIVE-CLiQ: The PPU arrangement exchanges control and drive data with SINAMICS S120 Combi over this path.
- Digital I/O: PP 72/48D PN modules provide the digital I/O connection in the SINUMERIK arrangement.
- Analog I/O: PP 72/48D 2/2A PN modules provide the analog I/O connection in the arrangement.
- Machine controls: Machine-control panels, handwheels and the MCP Interface PN serve operator or I/O roles.
Protection and Operating Conditions
- Front enclosure: The front reaches IP65 with the front cover closed.
- Rear enclosure: The rear uses a separate IP20 protection boundary.
- Supply path: The PPU uses 24 V DC with the specified negative and positive tolerances.
- Temperature limits: The front and rear have separate operating-temperature limits.