Features:
- Signal Conversion from Digital Control Values to 0–20 mA or 4–20 mA Field Outputs
- Provides 8 Analog Output Channels with Output Set as Predetermined (OSP) Functionality
- Communicates Directly via ModuleBus in S800 I/O and System 800xA Systems
The ABB AO810 3BSE008522R1 is an 8-channel analog output module for the S800 I/O system. It converts 14-bit digital control values into 0–20 mA or 4–20 mA analog output signals for compatible field devices. The module cyclically performs self-diagnostics, supervises the process power supply, and detects open-circuit conditions on active channels when the output set value is greater than 1 mA.
The AO810 3BSE008522R1 transfers output data through the S800 I/O ModuleBus. External 24 V DC power supplies the output circuitry, while ModuleBus provides communication between the I/O module and the connected communication interface.
The AO810 3BSE008522R1 supports Output Set as Predetermined (OSP), which sets the outputs to a predetermined state when an error is detected. Communication with the D/A converters is supervised by reading back and verifying the serial data. The module also performs cyclic self-diagnostics.
The AO810 3BSE008522R1 ABB Analog Output Module may be available from Apter Power for maintenance and replacement applications, subject to stock confirmation.
ABB AO810 3BSE008522R1 Analog Output Module Manuals,Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB AO810 3BSE008522R1 Analog Output Module Specs
General
- Manufacturer ABB
- Model AO810 3BSE008522R1
- Condition New Original ready stock
- Product Family ABB S800 I/O
- Related Analog Output Modules AO810V2 3BSE038415R1,AO845A 3BSE045584R1
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Process Variable Regulation: Modulating control valves, positioners, and dampers in water treatment, chemical processing, and oil and gas facilities.
- Motor Control: Sending setpoint speed and torque reference signals to Variable Frequency Drives (VFDs).
- Industrial Automation: Interfacing with indicators, chart recorders, and external controller inputs that require standard analog current loop feedback.
- Operating Temperature: 0°C to +55°C; approvals are issued for +5°C to +55°C.
- Storage Temperature: -40°C to +70°C.
- Relative Humidity: 5% to 95%, non-condensing.
- Ingress Protection: Rated at IP20, meaning it is designed for installation inside closed, protected control cabinets or enclosures.
- Output Set as Predetermined (OSP): Sets the outputs to a predetermined state when an error is detected.
- Cyclic Self-Diagnostics: The module performs self-diagnostics cyclically, including process power supply supervision and channel fault detection on active channels.