Features:
- Extends the I/O bus from a basic unit to remote I/O stations; supports single or redundant configurations.
- Works with Advant Controller 110/160, Advant OCS with Master SW, and S600 I/O.
- Legal for sale and installation in legacy ABB Advant Master process control systems under EU RoHS exemption.
The CI610-3BHT300003R1 is a dedicated I/O bus extender for ABB Advant Master basic units. It allows the basic unit (controller) to communicate with remote I/O racks located up to physically separated distances. This is essential in large process plants where the controller must be in a safe area while I/O modules are distributed near field devices. The module is used in two kit configurations: RF615K01 for single (non‑redundant) operation and RF615K02 for redundant (dual CI610) operation. Redundancy provides fault tolerance – if one bus extender fails, the second takes over without interrupting process control. For engineers maintaining legacy Advant Master systems (Controller 110/160), the CI610-3BHT300003R1 is a critical spare part.
The CI610-3BHT300003R1 is listed under several ABB product categories: AC 100 – Communication Modules, Advant OCS with Master SW – Controllers (Advant Controller 110 and 160), and S600 I/O – Communication Modules. This wide compatibility means the same bus extender can be used across different generations of ABB control systems. Whether you have an older Advant Controller 110 or a newer Advant Controller 160, the CI610-3BHT300003R1 provides a consistent I/O bus extension solution. It is also used within the S600 I/O family, which is known for its rugged design and high availability.
The CI610-3BHT300003R1 is explicitly exempt from the EU 2011/65/EU RoHS directive under Article 2(4)(c), (e), (f), and (j). This exemption applies to spare parts for legacy process control systems (ABB Advant Master) placed on the market before RoHS restrictions took effect. As a result, the module may contain lead, cadmium, mercury, or other restricted substances that are no longer allowed in new electronic products. However, for operators of existing Advant Master systems, this exemption is critical – it allows the continued sale, installation, and use of CI610-3BHT300003R1 as a spare part to keep legacy plants running.
The CI610-3BHT300003R1 ABB Communication Module may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
ABB CI610-3BHT300003R1 Communication Module Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
ABB CI610-3BHT300003R1 Communication Module Specs
General
- Manufacturer ABB
- Model CI610-3BHT300003R1
- Condition New Original ready stock
- Product Family
CI615,CI620,CI630
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Control System Expansion: Dedicated to Advant Master or AC500 control systems, extending the I/O bus by up to 50 meters.
- Critical Industrial Processes: Widely used in industries with extremely high requirements for real-time data processing and stability, such as petrochemicals, power energy, metallurgy, and papermaking.
- Redundant System Configuration: Commonly used in RF615K01 (standalone) and RF615K02 (redundant) I/O station kits to ensure continued operation of critical processes in the event of hardware failure.
- Real-time Diagnostics: Provides real-time analysis of system performance, supporting proactive maintenance.
- Fault Indication: The panel typically features status LEDs (such as running and fault indicators) for quick identification of internal module faults or communication interruptions.
- Hot Swap: Supports hot-swap module replacement, allowing maintenance without shutting down the entire system, ensuring production continuity.
- Physical Installation: The CI610 features a compact design (40mm wide x 273mm high) and requires mounting on a standard rack or rail. It weighs approximately 1.2 kg; ensure good ventilation during installation.
- Connectivity Requirements: Used to connect controllers and expansion I/O stations.
- Caching should be kept away from power cables as much as possible to avoid electromagnetic interference.