- Termination unit for SPCIS and SPQRS controller or station interfaces
- Combines analog and digital field termination with serial station connections
- Uses application-specific Bailey/ABB cables and configurable dipshunts
ABB NTCS04 is the controller and station termination unit documented for Bailey INFI 90 control, indicator, and operator-interface arrangements.
The manufacturer manual identifies four analog and three digital inputs, two analog and four digital outputs, and connection paths for compatible controller, station, and remote-I/O modules.
Before replacement, confirm the connected module, cable part number, input voltage selection, analog signal mode, dipshunt configuration, grounding, and field-terminal assignment.
Availability, condition, price, and shipping time for ABB NTCS04 are confirmed during quotation.
ABB NTCS04 Controller and Station Termination Unit Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Provides four analog and three digital input terminations for the documented applications.
- Provides two analog and four digital output terminations with the manual-defined signal modes.
- Select 24 or 125 V DC input arrangements and analog current or voltage mode only as documented.
- Supports documented control and indicator station connections through the specified cable assemblies.
- Interfaces with the listed controller, communication, and remote-I/O modules through application-specific cables.
- Match the installed module and cable number before moving any field conductors.
- Mount and ground the termination unit according to the Bailey cabinet and field-wiring practices.
- Set dipshunts and jumpers for the selected input, output, and station arrangement before energizing.
- Inspect field polarity, shield termination, surge-protection path, and connector seating during commissioning.
- SPCIS and SPQRS controller/station signal termination in Symphony Plus or legacy Bailey systems.
- Control and indicator station wiring for multi-function controller and communication-module arrangements.
- Remote I/O or PC-90 signal termination where the exact module and cable combination is documented.