Features:
- 75 kW and 145 A normal-use rating
- R6 IP21 wall-mounted mechanical configuration
- Published 138 A light-duty and 105 A heavy-duty points
ACS580-01-145A-4 3AUA0000080504 is the 75 kW R6 drive in ABB’s 400 V ACS580-01 portfolio.
Its larger power circuit must be integrated with the motor feeder, process controls, safety system, communication design, and enclosure thermal plan as one coordinated package.
Procurement should not proceed until lifting and mounting, protection and isolation, conductor terminations, cable routes, heat removal, duty class, options, signal testing, and site acceptance responsibilities are defined.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
ABB ACS580-01-145A-4 3AUA0000080504 ACS580 General Purpose Wall-Mounted Drive Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB ACS580-01-145A-4 3AUA0000080504 ACS580 General Purpose Wall-Mounted Drive Specs
General
- ManufacturerABB
- ModelACS580-01-145A-4 3AUA0000080504
- ConditionNew Original ready stock
- Product FamilyABB ACS580-01 Drives
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
R6 handling and mounting
- Handling: Use the approved lifting points, equipment, and site method for the R6 drive.
- Support: Confirm wall or frame strength, mounting geometry, and fasteners.
- Clearance: Reserve airflow, cover-removal, cable, and service spaces.
- Access route: Check doorways, transport path, lifting height, and final orientation before delivery.
75 kW feeder coordination
- Isolation: Provide the approved lockable isolation and stored-energy procedure.
- Protection: Coordinate fuse selection with the actual fault-current study.
- Terminations: Confirm lugs, conductor range, bend radius, torque, and phase clearances.
- Earthing: Design PE and cable-shield connections for safety and EMC requirements.
R6 commissioning controls
- Inspection: Verify identifiers, shipping condition, mounting, clearances, and terminations.
- Energization: Use a controlled checklist for supply, auxiliary circuits, STO, and communications.
- Loaded test: Observe motor current, temperature, vibration, and process response through the required range.
- Handover: Release the drive only with approved backups, drawings, tests, and maintenance records.