Features:
- Portable storage and transfer of compatible drive parameter sets.
- Handheld control panel with PC-based DrivePM support.
- Rechargeable operation for commissioning and maintenance work.
MFDT-01 68566380 brings parameter upload, editing, storage, and download functions into a portable service tool.
The programming tip connects to the supported FlashDrop interface so parameter work can be prepared without normal drive operation.
DrivePM manages templates and stored sets on a PC before they are transferred to the handheld unit.
The ABB MFDT-01 68566380 Drive Programming Tool may remain available for purchase and support from Apter Power beyond manufacturer end-of-life.
ABB MFDT-01 68566380 Drive Programming Tool Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
MFDT-01 68566380 drive compatibility
- Drive family: FlashDrop use is supported for applicable ABB ACS150, ACS350, ACS550, and ACH550 drives.
- Template match: The available template must match drive type, control mode, parameter-table version, and localization.
- Rating check: Download protection compares the stored set with the connected drive rating before transfer.
- Interface requirement: The target drive must provide the supported FlashDrop connection used by the MFDT-01 programming tip.
MFDT-01 68566380 parameter workflow
- Upload: A complete compatible parameter set can be read from a connected drive into the handheld tool.
- Edit and store: Selected values can be reviewed and saved in named sets for later reuse.
- Download: A checked set can be transferred to another compatible drive after identity and rating validation.
- Parameter visibility: DrivePM can prepare parameter groups so field users see only the values intended for the service task.
MFDT-01 68566380 service operation
- Battery use: Typical operating time is approximately four hours, with about 1.5 hours required for charging.
- PC link: The OPCA-02 cable connects the base unit to DrivePM for template and set management.
- Fault review: Displayed errors distinguish missing drives, incompatible sets, absent templates, and file-system problems.
- Portable controls: The removable panel and programming tip let the operator select files, review checks, and confirm transfers at the drive.
Supported projects for MFDT-01 68566380
- Series commissioning: MFDT-01 68566380 can copy an approved parameter set across multiple compatible drives in machine production.
- Replacement drives: MFDT-01 68566380 can restore a compatible saved set after a failed drive is exchanged.
- Workshop preparation: MFDT-01 68566380 can organize and verify parameter sets before technicians reach the installed equipment.
- Spare-drive staging: MFDT-01 68566380 can load an approved setup into a compatible spare through FlashDrop without energizing the main power circuit.