Discover how Apter Power helps customers source hard-to-find automation parts,overcome delivery challenges and keep production moving.VIEW OUR SUCCESS STORIES >>
Technical specifications for SDCS-COM-5 3BSE006567R1
Manufacturer:
ABB
Part Number:
SDCS-COM-5 3BSE006567R1
Product Family:
ABB Drives
Product Type:
Communication Board
Stock:
1
Board designation:
SDCS-COM-5
Product ID:
3BSE006567R1
Converter context:
DCS 500B with S21.xxx software
Communication channels:
3
Channel 1:
HDLC, 1.5 Mbit/s, PC service path
Channel 2:
Not usable with S21.xxx
Channel 3:
DDCS up to 4 Mbit/s
Supported adapters:
PROFIBUS, CS31, or MODBUS adaptation module
Fiber color convention:
RxD blue; TxD grey
Tariff Code:
Please confirm the destination before shipping
Country of origin:
Sweden
Place of shipment:
Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.
Three channels: separate communication paths support defined service and serial-link duties.
HDLC service path: channel 1 operates at 1.5 Mbit/s for a PC.
DDCS integration: channel 3 supports up to 4 Mbit/s through approved adaptation modules.
SDCS-COM-5 3BSE006567R1 is a DCS 500B communication board whose channel use depends on the converter software family.
The board separates the PC service path from the DDCS field communication path and relies on the appropriate external adaptation module for supported protocols.
Software revision and same-color fiber routing should be confirmed before a replacement board is connected.
Apter Power supports document review, quotation, and procurement for the ABB SDCS-COM-5 3BSE006567R1 Communication Board.
ABB SDCS-COM-5 3BSE006567R1 Communication Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Channel 1: HDLC at 1.5 Mbit/s provides the PC commissioning and maintenance path.
Channel 2: ABB states that it cannot be used with S21.xxx software.
Channel 3: DDCS up to 4 Mbit/s supports approved serial-link adapters.
S21.xxx: confirm the converter software family before assigning channels.
S21.1xx: channel 3 use depends on this documented software context.
Adaptation module: match the installed PROFIBUS, CS31, or MODBUS interface.
Blue fiber: connect the receive path according to ABB color coding.
Grey fiber: connect the transmit path according to ABB color coding.
Both ends: verify matching channel, color, and peer identity before startup.
DCS 500B service: PC commissioning and maintenance through the documented HDLC channel.
Drive communication: DDCS serial links through approved protocol adaptation modules.
Legacy replacement: exact board exchange where software and channel assignments are verified.
Description
The SDCS-COM-5 3BSE006567R1 is the communication board documented for ABB DCS 500B converter modules with S21.xxx software. Its three channels support commissioning, maintenance, and defined serial communication paths.
On SDCS-COM-5 3BSE006567R1, channel 1 provides a 1.5 Mbit/s HDLC path for a PC, while channel 3 supports DDCS links up to 4 Mbit/s through the applicable PROFIBUS, CS31, or MODBUS adaptation module.
Channel restrictions govern SDCS-COM-5 3BSE006567R1 selection: ABB states that channel 2 cannot be used with S21.xxx, and channel 3 is limited to S21.1xx with the documented SDCS-CON-1 context. These boundaries must be verified before wiring or software changes.ges.
Alternative Names
SDCS-COM-53BSE006567R1SDCSCOM5
Technical notes
Channel restrictions are the main integration risk for SDCS-COM-5 3BSE006567R1. Do not use channel 2 with S21.xxx, and use channel 3 only with the documented S21.1xx and SDCS-CON-1 context; verify blue RxD and grey TxD routing before energizing or stop commissioning until both ends match the approved link record.
We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
Trust Guaranteed
Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
Expertise
Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.
FAQS
The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
How should SDCS-COM-5 3BSE006567R1 be selected when the converter software revision is unknown?
Read and record the S21.xxx revision before ordering. Stop selection if channel assignments and the required SDCS-CON-1 context cannot be confirmed.
What compatibility check is essential for channel 3 on SDCS-COM-5 3BSE006567R1?
Confirm S21.1xx software, the installed adaptation module, DDCS role, and peer device. Do not connect the channel while any boundary remains unidentified.
Which installation practice prevents crossed fibers on SDCS-COM-5 3BSE006567R1?
Trace both cable ends, retain blue for RxD and grey for TxD, verify channel numbers, and stop before energizing if the peer labels disagree.
If SDCS-COM-5 3BSE006567R1 communicates with a PC but not the field network, where should diagnosis begin?
Keep channel 1 separate from channel 3 diagnosis, then check software revision, DDCS status, adapter power, fiber routing, and peer configuration.
What must a migration preserve from SDCS-COM-5 3BSE006567R1?
Preserve each channel, protocol adapter, data path, speed, peer, and failure response, then prove the replacement architecture before removing the original board.
Which checks should pass before SDCS-COM-5 3BSE006567R1 returns to service?
Verify board identity, software revision, channel use, fiber colors, adapter identity, PC service access, DDCS exchange, and stable recovery after restart.