Features:
- Bridge Between High-Level Control Networks and ABB Rack Backplane
- Merges Multi-Core Digital Processing with Hot Standby Redundancy Support
- Works in Conjunction with the AC 800M Series and System 800xA Platform
The ABB YPP110A 3ASD573001A1 operates as the Digital Processor Module in an AC 800M control rack, providing reliable real-time execution of control logic for all modules within the system. It continuously processes incoming field signals from multiple analog and digital I/O modules and distributes corresponding control commands through the rack backplane to support steady-state operation of all monitors and modules. Seamless computational continuity is standard with the YPP110A 3ASD573001A1, however utilizing an optional Redundant Processor Configuration will allow seamless switchover to a backup unit in the event of a primary processor failure.
The YPP110A 3ASD573001A1 provides essential processing functions common to the entire rack, and is a critical component of the control path, directly affecting the proper, normal operation of the overall automation system. One or two YPP110A 3ASD573001A1 processor modules are required per rack depending on the desired redundancy level. The YPP110A 3ASD573001A1 occupies a single standard slot in the rack and is positioned within the dedicated processor slots.
For Dual Redundant Processing applications, the AC 800M System requires a second YPP110A 3ASD573001A1 processor module installed in the redundant slot. In addition to standard single processor operation, the redundant configuration also performs automatic switchover. The AC 800M dual processor configuration executes failover using the internal arbitration logic specified in the module firmware.
The YPP110A 3ASD573001A1 ABB Digital Processor Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB YPP110A 3ASD573001A1 Digital Processor Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB YPP110A 3ASD573001A1 Digital Processor Module Specs
General
- Manufacturer ABB
- Model YPP110A 3ASD573001A1
- Condition New Original ready stock
- Product Family YPQ110A 3ASD573001A5,YPG110E YT204001-FD
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Power Generation & Excitation Systems: Widely utilized as a magnetic excitation controller to regulate the excitation current of synchronous generators, maintaining grid and voltage stability.
- Drive & Motion Control Systems: Acts as the central digital processing unit for large industrial drives, managing high-precision servo motors in packaging, printing, plastics, and textile manufacturing.
- Process Automation: Integrates seamlessly into Distributed Control Systems (DCS) for the chemical, metallurgical, and water treatment industries, executing complex logic programmed via platforms like Control Builder M.
- Multi-Channel Signal Handling: Equipped with multiple input and output channels to simultaneously interface with a variety of digital field devices, sensors, and actuators.
- Real-Time Data Exchange: Bridges the gap between the plant floor and centralized control layers. It processes real-time data from field devices and forwards it to upper-level DCS/PLC hardware via high-speed internal buses or standard industrial protocols.
- System Scalability: Designed with open communication standards to ensure easy integration into existing industrial networks, allowing for future expansion without replacing the core architecture.
- High-Precision Control Loops: Utilizes advanced microprocessors to run precise closed-loop control algorithms, adjusting parameters like speed, position, and current excitation in milliseconds.
- Built-In Fault Diagnostics: Features automatic self-diagnostic capabilities that instantly detect internal or external errors (such as CPU overloads, communication timeouts, or I/O faults).
- Dual-Layer Status Monitoring: Supports both local and remote monitoring. Operators can check physical status via onboard LED indicators or review comprehensive fault codes and telemetry data sent to a centralized Human-Machine Interface (HMI).