Features:
- Remote ProcessMaster electronics: separates transmitter access from the installed flow sensor
- HART interface: supports the communication configuration marked on the supplied ABB unit
- IP67 housing: protects the remote enclosure while sensor configuration remains installation-specific
The complete configuration string distinguishes this transmitter from other FET321 order variants.
Its 24 VAC/DC and HART markings are immediate electrical and communication release points for a service spare.
The remote arrangement does not remove the need to restore the paired sensor and process setup.
For FET3211S0A1A2C0H2M6/3K672013030195 ABB ProcessMaster Remote Transmitter enquiries, Apter Power supports document review, quotation and procurement coordination.
ABB FET3211S0A1A2C0H2M6/3K672013030195 ProcessMaster Remote Transmitter Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Remote arrangement: the FET321 electronics are installed separately from the flow sensor.
- Complete order string: the full configuration code controls the supplied transmitter variant.
- Sensor relationship: the installed sensor identity remains part of the meter system.
- Commissioning effect: process settings must be restored before measurement is released.
- Supply marking: the supplied unit is labelled 24 VAC/DC, 50 Hz.
- Power demand: the nameplate states less than 20 VA.
- Communication: HART is the marked transmitter protocol.
- Service boundary: supply and communication must both match the host installation.
- Protection marking: IP67 applies to the supplied transmitter enclosure.
- Remote location: installation position can differ from the sensor location.
- Configuration source: the sensor and retained application record govern restoration.
- Stop condition: do not release an unexplained sensor or flow-direction mismatch.
- Conductive-liquid flow measurement: serve as the remote transmitter in an ABB ProcessMaster electromagnetic flowmeter.
- Remote electronics access: place the transmitter where operating and maintenance access is practical.
- HART plant integration: connect the documented transmitter configuration to a HART-capable host.